E-bike LED Display: 1. 4-7 Volume Display, 2. 3-5 level PAS, 3. Fault Display 4. walk assist

E-bike LED Display

1,Rated voltage 25-40 V D.C.2,Current absorption: about 80 mA Max;Switch "ON" during normal operation; Below 1 mASwitch "OFF" [standby current]3,Voltage lights: Measurement and visual indication of battery voltage "V" [Range]-5 LED's.4,Possibility is provided for individual calibration of the thresholds via software of motor controller.5,Shift lights: Visual indication of Shift Position-5 LED's6,Shift Button: "Shift Up" & "Shift Down" Can operate the Shift Between Shift 1 and Shift 5.

7,Automatic Shut-Off of Display LED's and of bike ECU after 8-10 min of non use, the display Control Electronics switches to "standby" condition [Below 1 mA absorption] The display Control shuts off the Bike ECU,Reset of Display Control and bike ECU by Power Switching OFF/ON.Interface and Connection to motor controller can be customized for individual quest.   

LED Meter Display E-bike LED Display