Welcome to ECVERY
stainless steel float switch
stainless steel float switch
Supplier Info
[China Supplier]
Contact Person : Mr. Li Alex
Tel : 86-21-60976207
Fax : 86-21-60976212
Product Detail
stainless steel float switch Mounting size:G1 1/2 L 164.5mm(the length can be define) Cer: ISO9001,RoHs Delivery: 14days stainless steel float switchAdvantage and applications Classic design,compact size;Choice of normal open or normal close;No standby power requirement;Customer can define activated distance,cable length and connector;Hermetically sealed,suit to tough environment and long life.Widely used in household appliances, automotive applications and control technology.How Magnetic Reed Liquid Level Sensors WorkThe purpose of a float switch is to open or close a circuit as the level of a liquid rises or falls. Most float switches are "normally closed," meaning the two wires coming from the top of the switch complete a circuit when the float is at its low point, resting on its bottom clip or stop (for example, when a tank is dry). Most float switches utilize a magnetic reed switch to open or close the circuit. The reed is encased in a glass tube, which is cemented into a plastic or stainless steel stem with epoxy. The illustration to the left demonstrates how a magnet can be used to open or close a circuit by moving it closer to or farther away from a reed switch. When the magnet comes close to the two contacts, they draw together and touch, allowing current to pass through. When the magnet is moved away, the contacts demagnetize and separate, breaking the circuit.In a float switch, the magnetic reed switch is hermetically sealed in a stem, most often made from plastic or stainless steel. The float encases a sealed magnet, which moves up and down the length of the stem as a fluid level rises and falls.As the magnet passes by the contacts in the encased reed switch, they draw together and complete a circuit between the two lead wires, as shown in the cutaway to the left.

The operation shown can usually be reversed by removing the bottom clip from the switch, inverting the float and replacing the clip. When this change is made, the switch circuit will be open when the float is resting on the bottom clip and closed when the float rises.Properly used, float switches can deliver millions of on/off cycles, for years of dependable operation. Failures are normally due to overloading, frequently caused by spiking voltage

Magnetic Level Switches
Part No.SUS Type
LS08LS09LS12LS18LS13
Appearance
Housing Size(mm)M10, L-61M10, L-801/2"NPT or M10G1½ , L-164.5M14, L-95.5
FeaturesVertical Mounting form inside

Horizontal

Mounting form inside

for M10 or

1/2" NPT screw

Vertical Mounting from outsideSpecial design
Contact Form1A,1B
Contact Rating MAX10/50W10W
Max.Switching Voltage200/300
Min.Breakdown Voltage250/500250/450
Max.Switching Current0.5A
Max.Carry Current1.0/2.5
 -40°C to +200°C0°C to +80°C
Housing MaterialSUSCopper + SUS304

stainless steel float switch

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.