LX5 Series Explosion Proof Limit Switch (IIC)
•Application
1. Design for explosive atmosphere Zone 1, Zone 2
2. Designed for
Groups IIA,IIB,IIC
Temperature classes T1~T6
3. Design for petroleum exploitation, refinery, storage, chemistry, medicine, military and military facilities etc. sites with explosive atmosphere.
4. Used to location signal feedback in electrical control circuit.
•Features
1. Enclosure is die casted of aluminum alloy ,high voltage electrostatic powder coated after shot blasted.
2. Built-in flameproof limit switch components.
3. Limit switch components enclosure is injected of flame resistant engineering plastic, joint welded by ultrasonic wave.
4. Outline dimensions and technical specifications compliance with En50041 with good interchangeability.
5. Anti dropping type earthlings bolt easy to mount and maintains.
6. Compress seal design to enclosure ,cover, spindle and cable entries etc. to improve ingress protection.
7. Several mounting types can meet different sites need.
8. With good water resistance and dust resistance property.
9. Steel conduit and cable wiring.
•Technical Specification
1. Compliance with: GB 3836.1,GB 3836.2,GB 3836.3,EN50041,IEC60079-0,IEC60079-1,IEC60079-7
2. Explosion protection: ExedIICT6
3. Rated voltage: AC220/380V
4. Rated current: 5A
5. Contact type: 1NO 1NC
6. Ingress protection: IP66
7. Corrosion resistance: WF1
8. Cable entries specification: M20×1.5
9. Cable ‘s outer diameter :Φ6mm~Φ9mm
•Selection Table
Model | Rated voltage(V) | Rated Current(A) | Cable entries Spec. | Cable’s outer dia. | Explosion protection |
LX5-G |
AC220/380 |
5 |
M20×1.5 |
Φ6~Φ9 |
Exed IIC T6 |
LX5-K | |||||
LX5-Z | |||||
LX5-L |
•Outline & Installation dimension
LX5 Series Explosion Proof Limit Switch(IIC)