the control circuit AC 50 HZ, 60HZ, rated working voltage is up to 380V, DC rated working voltage up to 220V

Application

 Limit switch LX36-8 which is suitable for cranes,It is mainly used for the control circuit AC 50 HZ, 60HZ, rated working voltage is up to 380V, DC rated working voltage up to 220V, for limit the angle of crane rotary motion device and sequence control.

Working conditionAltitudeHeight: no more than 2,000 meters Ambient temperaturePermissible ambient temperature between-25°C and +75°C. Relative humidityThe max. monthly average relative humidity is 90%( the lowest temperature of that month is less than +25 °C)Class of pollutionClass of pollution : 3

Structure

The structure of the limit switch is rotary type,Which has 3 speed ratio   The max. control loop is 8.

Technical data

Basic data see table 1Table 1

Rated control capacity	Rated voltage(Ue)(V)	Rated current(le)(A)	rated thermal current(lth)(A)	Rated operate frequency(time/hour)	Rated insulation voltage Ui(V)
300VAAC	380	0.8	6	300	380
	220	1.36
10WDC	220	0.045
	110	0.09

 On offOn off data see table 2

Table 2

Application	Rated current(le)	On condition			Off condition
		l(A)	U(A)	COS or T0.95(ms)	Lc(A)	Ur(V)	COS or T0.95(ms)
AC-11	380V0.8	8.8	418	0.7	8.8	418	0.7
DC-11	220V,10W 0.045A	0.05	242	300 ms	0.05	242	300 ms

Electrical lifeThe electrical life of the limit switch on the table 3 conditions is 100 thousand cycles.

Table 3

Application	On condition			Off condition
	l(A)	U(A)	COS or T0.95(ms)	Lc(A)	Ur(V)	COS or T0.95(ms)
AC-11	8	380	0.7	0.8	380	0.4
DC-11	0.045	220	300 ms	0.045	220	300 ms

Mechanical lifeThe mechanical life of the limit switch is 1 million operating cycles.Limiting speedThe max. rotate speed of the input shaft head when operating the limit switch is 150r/min

Limit switch LX36-8 series