Ads by Google
OIL FILTER
1. The basic profile
The engine working process, metal abrasive dust, dust, high temperature oxidation of carbon and glue shape
sediment and water into constantly lubricating oil.The the function of the oil filter is filter out the mechanical
impurities and colloid, protect the clean to lubricatingoil, extend its use period.The oil filter should have strong
ability to filtration, small flow resistance, long life and other properties.Modern car engine in general with only set
filter and a full streaming oil filter.
2. The oil filter technology characteristics
a)Filter paper: the requirements to the paper filter of oil filter is higher than the air filter,high quality oil filter can
filter paper in severe temperature change,filtering impurities, ensure enough flow.
b)The rubber sealing ring: high quality oil filter sealing ring is to use special rubber synthetic, guarantee 100%
don't leak.
c)Backflow valve miscalculates suppress only high quality oil filter is only found in. When the engine flameout,it can
prevent the oil filter dry; When the engine to the ignition, it produce immediate pressure, supply oil lubrication engine.
d)Relief valve: only high quality oil filter is found in.So the relief valve is in an emergency situation engine protection of the key.
3. The oil filter installation and change cycle
installation:
A) drained or blot old oil
B) loosen screw, remove the old oil filter
C) in the new oil filter on the sealing ring with a layer of oil
D) to install the new oil filter and tighten the screw
Recommend replacing cycle: cars and commercial vehicle are replaced every six months
4. On the oil filter requirements of the car
1)Filtering precision, filter out all > 30 um particles
2)To reduce the gap caused by wear and lubrication particles (< 3 uml-ocl 30 um)
3)The oil flow of oil demand with the engine
4)Change cycle is long, at least, longer than the life of the oil (km, time)
5)Filtration precision accord with engine protection, reduce wear requirements
6)Let gray amount is large, suitable for bad environment
7)Can adapt to higher oil temperature and corrosion
8(Filter oil pressure difference as low as possible, that the oil through the smooth
More technical specifications
1)Filter type---------------------------------------Carburetor type
2)Filter material---------------------------------The resin processed microporous filter paper and paper
3)Use the validity--------------------------------Every use 2-advice car 30000 km replacement of a filter
4)Shell material---------------------------------Polypropylene
5)Packaging--------------------------------------According to the customers requirement
6)Other---------------------------------------------According to the customer to change
Product use:
The product is mainly used for car, use gasoline car use. This filter is very suitable for Peugeot brand car use. The
main function is to the water and gasoline magazine filter, prevent the fuel system of congestion, ensure that fuel system supply equipment normal work. Due to the high efficiency of filtering, very good guarantee in the pure
gasoline into the carburetor. At the same time avoid the gasoline into the engine!, damage to the engine
Product performance:
Work environment temperature-----------------40 degrees to 80 degrees
The rated flow----------------------------------------0.5 L/min
Filtration efficiency-----------------------------------more than 95%
Evil capacity--------------------------------------------suggested two years replacement of a filter
Other technologies:
1. The filtration without scars, crack and appearance other defects, import and export nozzle without burr
2. Filter in the rated flow pressure loss under is no more than 1.33 Kpa
3. In 0.1 MPA pressure filter under the action of filter does not destroy
4. Under normal temperature in 0.2 MPA air filter function without leakage under the pressure
5. Of filter shell compression damage strength greater than 0.3 MPA
1041800109---HU727/1X---E142HD21---OX133D--- FILTER USE FOR BENZ C200 SERIES