Name: High Speed High Precision High Rigid Vertical Processing Center | |
Model: VT530 | |
stroke | |
X-axis (mm) | 500 |
Y-axis (mm) | 300 |
Z-axis (mm) | 450 |
The distance between Spindle to worktable (mm) | 90-450 |
worktable | |
dimension(length * width) (mm) | 600×300 |
T-slot (mm) | 18×3×105 |
maximum load (kg) | 300 |
Spindle system | |
Spindle rotating speed (rpm) | 60-8000 |
Spindle taper hole | BT40 |
feed system | |
X, Y, Z-axis rate of rapid displacement (m/min) | 20/20/20 |
feed speed (m/min) | 10 |
track form | Square Slides |
Automatic Tool Change System | |
Tool storage capacity | 12 |
Tool storage type | Cloak-style |
Maximum diameter of cutter (mm) | Φ80(Φ150) |
Maximum length of cutter(mm) | 300 |
tool changing time(knife to knife) (s) | 4 |
tool changing time(point to point) | 3.5 |
Accuracy | |
Full accuracy(mm) | ±0.005 |
Repeat accuracy(mm) | ±0.003 |
The use of pressure(kg/cm) | 5-7 |
Machine Weight(kg) | 2000 |
Numerical Control System (Mitsubishi) | M64 |
Drive motor (Mitsubishi)(kw) | 1.0/1.0/1.0 |
Servo spindle (Mitsubishi)(kw) | 3.7 |
MACHINE SIZE | |
Hight of machine weight(H) (mm) | 1800 |
Floor space(L×W) (mm) | 2200×2000 |
Power requirement (KVA) | 10 |
Features
Top model of International High-speed Vertical machining Centre
1. Y-shaped column provides top rigidity, honeycombed machine tool bed, sliding saddle, working table; the structure of the machine tool is optimized by finite element analysis.
2. 8000rpm is standard. 10000-15000rpm is optional, high-speed accurate main spindle driven by silencing timing belt. Dynamic balancing testing is done on main spindle in 2 times result in high revolution accuracy with low vibration and high machining surface quality.
3. Main spindle transmission adopts the C3 accurate ball screw; Machine tool high accurate positioning is ensured by three axes laser measuring, ballbar testing & bidirectional pitch compensation in μm.
4. Meehanite high strength casting through excellent heat treatments; Super high frequency temper on guideway, precise lapping & scraping.
5. The machine tool may equip spindle box at 1:2/1:4/1:8 per request to get higher cutting torque, thus facilitate the reasonable selection of spindle box according to requirements. This may raise productivity and lower investment.
6. The machine tool may equip multiaxial boring/ multiaxial drilling spindle box to achieve the multi-cutter, multispindle efficient machining, which reflect machining center innovatively integrate with advanced technique of combined machine tools.
7. Optional configuration forms multi-functional machine tool with flexible module to realize a number of machining steps finished by one time loading. This also make the structure feature of top rigidity four guideways vertical machining centre keep pace with technique trend of international machine tool.
VT530 High Speed High Precision High Rigid Vertical Processing Center