Open-type full automatic pneumatic external barrel press mortising machine
Product introduction
This equipment is suitable for the pressure tenon rocessing of the solar water heater industry and the coopery industry. It can docking press the fold stainless steel plate. The rolling plate and other boards into the needed shape one-time, can compact the tenon tank which has been coaked. One-time forming, fast speed, the flat tighten seam of the water tank and the beautiful appearance make it become the ideal equipment for all kinds of the thin tank shaped containers.
Product Features:
1. This equipment is welded by steel plate and other kinds of steel.
2. It through the air compression and the cylinder lift to produce fluctuation pressure power.
3. The workbench uses the simple locking latch, fastens the work bedplate to the operating position tightly in 4. the work hours and loosens the locking latch at the end of the work, and then extracts the work pieces.
5. When using the equipment, people should fasten the fold plates through both sides of the cylinder tightly, and then start the pressure tenon machine to compact the edgefold from the front to the back for the docking purpose.
Technical specification
Model specification | Rated voltage | The power rating | Comprssed air |
L1500/L2000/L2500/L3000/L3200mm | 380V | 1.5 KW | 0.25-0.6Mpa |
Open-type full automatic pneumatic external barrel press mortising machine