Ads by Google
Automatic bottle unccrambler
1, Main motor is the frequency speed changing method.
2, Applying two-time pushing and unscrambling device will reduce amount of empty working position and improve efficiency of output bottle.
3, Special designed dropping bottle slot can suit bottles with different length. It needn’t change bottle slot and just adjust slot properly.
4, The middle of cylinder has a door for mould exchange, this makes it convenient disassemble and assemble bottle slot and treat clog.
5, The bottom of cylinder has a door for maintenance, this makes it convenient for workers entering bottom of machine.
6, This machine is equipped with manual operator for easy maintenance.
7, It has complete safety measure. When maintenance door and mould exchange door are open, machine can’t start, then you can use manual operator to control machine.
8, The output bottle poking wheel of unscrambler is equipped with block bottle detector that can protect machine effectively.
9, On the umbrella shape tower at the center of unscrambler, there is a bottle detector to control stop and start of lifting machine that supplies bottle.
10,The bottle’s transportation applies air convey way suspending bottleneck method to avoid bottle’s turnover.
| model | LP-1 | LP-2 | LP-3 |
| dimeter(mm) | 2450 | 2600 | 3000 |
| poroduction capacity(bottle/h) | 8000-10000 | 12000-15000 | 18000-24000 |
| gas soure pressure(Mpa) | 0.7 | 0.7 | 0.7 |
| gas consuming volume(m³/min) | 0.4 | 0.6 | 0.8 |
| suitable bottle type(mm) | Bottle diameterφ50-Φ90 Heigh of bottle 150-290 | ||
| main motor power(kw) | 1.5 | 2.2 | 4 |
| weight (kg) | 3000 | 4000 | 6000 |
| overall dimension(mm) | 3100*2450*2200 | 3300*2600*2200 | 3700*3000*2200 |
High speed type of bottle unscrambler