1.Good rigidty and stability. 2.Integrated hydraulic transmission system. 3.Shearing in sections, aligning with light. All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability. integrated hydraulic transmission system, with good reliability. Triple support rolling rude rail to eliminate gaps of support and enhance shearing quality. Mechanical rear stopper with manual fine tuning, and digital in dication. Clearance in between shearing blades adjusted by hand wheel to be quick, accurate and convenient. Rectangular blades with four cutting edges to prolong working life, adjustable shearing angle to reduce deformation of the sheet. Upper blade holder has inward tilling structure to facilitate material feed in and also enhance accuracy of the work piece. Function of shearing in sections, function of aligning with light. Optional: rear material holding device(or for other choice)

serial nmuber	project		value	unit
1	thickness can be cut		16	mm
2	width can shears		3200	mm
3	material strength by shears		σb≤450	N/mm2
4	trips		7	/min
5	shear angle		2°
6	throat depth		150	mm
7	blade length		3300	mm
8	ght table height above ground		800	mm
9	after the block area		20~800	mm
10	main motor	model	Y180M-4 B5
		power	22	KW
		speed	1440	rpm
11	axial piston pump	model	63MCY14-1B
		flow	63	L/min
		pressure	31.5	Mpa
12	dimensions	long	4000	mm
		wide	2100	mm
		high	2000	mm

QC12Y-16X3200 Hydraulic shears