It can used together with 750kg pneumatic forging hammer, or 1000-2000kg steamed empty dual-use hammer .

DYH-0.6S forging manipulator has a good view, turning flexible and cohesive, and has a good performance, and it is one of the most advanced equipment in the forging industry. It can used together with 750kg pneumatic forging hammer, or 1000-2000kg steamed empty dual-use hammer or other corresponding tonnage of hammer, it is needed in the forging industry. DYH-0.6S is operated throughout hydraulic transmission, each Movement system is adjusted by every speed.The major movements as follows:     1, the cart can go forward and back2, the platform can turnaround  in 360°3, tongs pole can turn4, tongs pole can parallel movement (up and down)  5, tongs pole can incline 6, clamp  main technical parameters Nominal load weight 0.6t Rescue moment 8820N.m Holding round material diameter Φ90-380mm Holding square material diameter 90-340mm Clamp rod center height 775-1200mm Clamp rod overhang 1200mm Rail distance 1200mm cart radius of gyration 2100mm Clamp  radius of gyration 775mm Manipulator run speed 0-45m/min Clamp slew speed 0-30r/min Clamp parallel lifting speed 0-6 m/min Clamp incline speed 0-6 m/min Platform slew speed 0-4r/min Clamp up-incline angle 10° Clamp down-incline angle 22°

Forging Manipulator