Description:
Electric motor grab on overhead crane
The electric motor grab is mainly used on cranes equipped with self-owned switching mechanism for material load and unload at anyheight .Its productivity is higher than that of sing-cable grab and easy to operate and high in load an unload .It is applicable for grabbing various loose accumulations ,During operating the grab ,According to lifting height ,cable winders are abbed for energy transort .
Note:the grab cannot be operated underwater.
IF you want to order our Grab, please let me know the following information:
The capacity and the volumeThe proportion of materials:The power source in your country:Mode | Volume (m³) | Proportion of material(t/m3) | Capturing the materials | Percentages of pulley | Diameter of steel wires(mm) | open and close time(S) | capacity of the crane | Diameter of pulley(mm) | Self-weight of grab(t) | Total height (mm) | Parts of the filler (a×b×S) |
D3 | 0.3 | 0.8-1 | 0.5 | 4 | φ11 | 16 | 3 | φ250 | 0.73 | 1900 | 1200×750×360 |
D5 | 0.5 | 1.6-2.4 | 0.8-1.2 | 4 | φ11 | 19 | 5 | φ250 | 1.192 | 2280 | 1365×896×540 |
D7 | 0.75 | 1.6-2.4 | 1.2-1.8 | 4 | φ13.5 | 19 | 5 | φ250 | 1.32 | 2385 | 1630×950×570 |
D10 | 1 | >0.8-1.2 | 0.8-1.2 | 4 | φ11 | 169 | 5 | φ250 | 1.4 | 2385 | 1900×1080×630 |
D15 | 1.5 | >0.8-1.2 | 1.2-1.8 | 4 | φ13 | 22 | 5 | φ250 | 1.8 | 2620 | 1920×1178×780 |
D20 | 2 | >0.8-1.2 | 1.6-2.4 | 4 | φ15 | 22 | 5 | φ250 | 2.1 | 2620 | 1920×1470×780 |
Electric motor grab on overhead crane