CDH type vertical lifting clamp application is lifting steel plate vertically
CDH type vertical lifting clamp loading range is from 1t-8t
One piece of lifting clamp is used for testing and one pc or two pcs are recommened for lifting operation.
Multi plates cannot be lifted using vertical CDH lifting clamp.only lift one pc of using one CDH Llifting clamp one time.Up the lock lever to tighten lock spring when the clamp under loading.Down the lock lever to loose lock spring,when you could unload.
The loaded object shall not touch anything when operating,over loading is prohibited when using lifting clamp.
The testing load of CDH vertical lifting clamp is 2 times of clamp working load.
The CDH Vertical lifting clamp is with lock spring during the clamp non-work condition,locking device going in nature step-ip,put the object in the clamp,the strength becomes the proportion enhancement.
CDH type Vertical Lifting Clamp specification
|Vertical Lifting Clamp CDH type|
|Art.No.||WLL/(t)||Stell plate Thickness(mm)|
Vertical Lifting Clamp CDH Type