CT film (x-ray film, medical film,CT film)

This film is a general film with blue polyester bases, the obverse side coated with sensitive emulsion and the reverse side with a halation layer.

It is suited for general diagnostic radiography,such as: computed tomography, magnetic resonance imaging, ultrasonic imaging, isotope radiate shadow etc.. It features abundant graduation and high definition.

Specifications:

1) 8in x 10in, 11in x 14in, 14in x 14in, 14in x 17in, 35cm x 35cm, 35cm x 43cm, etc.

2) Special specifications available according to customers' requirements.

Handling :

The film should be handled carefully by the edges to avoid physical strains.

The best conditions of usage should be: temperature:18-24 ,humidity :50%RH-65%RH.

Hands must be clean, dry and free of lotions ,etc.

This film is designed for 90-seconds automated processing or manual processing.

The former is recommended with any kinds of film processor, developing at 30-35 in 23s.

In manual processing ,the film should be developed in temperature 20 for 5 minutes, fixed in 5-8 minutes, washed for 10-30 minutes and dried.

Safelight:

Use a safelight filter (dark red) in a suitable safelight lamp equipped with a 15-watt bulb. Keep the film at least 4 feet (1.2 meters) from the safelight, and the total lighting time is in

10 minutes..

Storage:

Store in a cool, dry place (The suitable temperature is 10-20, the humidity is 30%RH-60%RH).

Keep it away from dampness, high temperature, any bad effective gases, x-ray, gamma ray or any other penetrating rays.

Stored vertically to avoid any harmful effect caused by pressure

CT film (11in*14in)