Fiberglass casting tape 100% permeable to X-ray Better air-permeability High hardness, light weight, easy ues CE,FDA

Introduction: 

Orthopedic Fiberglass Casting Tape is made from multi-layer polymer polyurethane saturated through special fiberglass. Polyurethane is a material which contains the chain of soft block copolymer, several advantages such as well viscous and curing speed by itself, high hardness and light weight. Polyurethane adhibition in the field of medical because he has good biocompatibility, the experiments of animal, acute and chronic toxicity test confirmed that medical polyurethane non-toxic, non-distortion of the role of allergic reactions. It is a substitute of traditional plaster bandage

Specification:

Length: 3.6m    

Width: 5cm/ 7.5cm/ 10cm/ 12.5cm

 

Characteristic  

1.Special fiberglass material

 

2. Better air-permeability

 

3. Fast curing. 20 minutes can receive the weight

 

4.100% permeable to X-ray 

 

5. High hardness and light weight.

 

6. Perfect waterproof. Can bathe and accept medicated bath

 

7. Easy operation and better plasticity. Sclerosis can be activated at room temperature water

 

8. Comfortable and safe. Non-toxic, no chemical reaction and allergic reaction

 

How to use:

Choose proper specification according to the real needs.Put the cotton paper or yarn as mat on the needed part.Wear latex gloves, open the package and take the bandage out. Saturate it in room temperature water for 3-4 seconds and press it 2-3 times to squeeze the water out.Make a spiral wrapping up with 3-4 layers on non-supporting part and 4-5 layers on supporting part.It takes 3-5 minutes to finalize the shape. 20 minutes to reach the functional strength.It can be removed by a electric plaster sawer

Storage

Be careful not to break the package

Store the bandage at room temperature

Shelf Time: 3 years

If you are interested in our products , feel free to contact us .

Xi'an YuenSun Biological and Technological Co.Ltd.

orthopedic fiberglass casting tape