Welcome to ECVERY
LED panel light solar wall light
LED panel light solar wall light
Supplier Info
[China Supplier]
Contact Person : Mr. Wang Sam
Tel : 86-755-26501658
Fax : 86-755-61675805-2270
Product Detail
1.Luminous Efficiency:100~110lm/W 2.Chip On Heat Sink,each bead with one radiator

Power:30W,45W,60W           

Color temperature:2700~6000K  Lumens per watt(lm/w):100~110         

CRI:above 80  Average life span(hrs):above 50000 

Model NoDGCLED LD 30W,45W,60W  
Input VoltageAC85-265V
Frequency50-60HZ
Power Factor>0.95
Total Harmonic Distortion<15%
Power Supply Efficiency>90%
Color Rendering IndexRa>75
LED Consumption136
LED Luminous Flux100-110 lm
Color Temperature2700~6000
Beam Angle60°~130°
Junction Temperature≤60°C
Working Temperature50°C~60°C
Working Humidity10%-90%
Working Life50000Hrs
IP GradeLED/Driver IP68,Lamp IP65
Housing MaterialAluminum Die Cast
Lamp Size230*160*80mm

advantages :

1. Shenzhen DGCLED Lighting Co.,Ltd. used patented technology, "Chip on heat sink" with high efficient, luminous light fades decay, long life, low failure rate, light weight, beautiful appearance, has a good fashion by appearance.

 2, DGC'S street lights with large luster patent every single lamp beads independent power supply circuit design, a stars light bead failure does not affect the other lamp beads, to avoid a large area, multi-satellites lamp beads bright defects, and significantly enhance the experience of the customer's application.

 3,"DGC'S lights" luster patent and down through the assembly technology, every single lamp beads independent radiator up and down through greatly enhance the cooling effect of the radiator. Completely solved the radiator after the accumulation of dirt, dust, cooling effect is significant decline in fatal chronic problem.

 4, "DGC'S lights"  precision custom high-efficiency power conversion efficiency up to 93%, power factor above 0.96. The luster of the highly efficient LED lamps, with high-efficiency power supply, the overall brilliance street lights energy-saving effect!

 5,DGC'S lights" luster patent full-size rectangular beam optical design, road illumination uniformity, soft light, night road recognition rate greatly reduces the incidence of road accidents.

6. The common market for integrated lamp of street light, the luminous efficiency around 75LW/W; DGC's street lights, the luminous efficiency of about 105LW/W luminous efficiency higher than the other products 40%.7. The common market integrated lamp beads of street light, the actual light decay per year decline in more than 40% (one year, energy-saving brightness is not enough, need to be wasted);however DGC's street lights, actual light decay per year decline in less than 2% , with high light efficiency, energy saving of more than five years. The life span is five times that of other products.

 

The first: the advantage of heat dissipation:             three ways for the heat dissipation: conduction, convection and radiation. the heat of the chips coming out, and then through the radiator and then heat by convection and radiation means, diffusion into the air, and the convection plays a major role from these ways.             1.1 difference of conduction: The DGCLED company used "Chip On Heat Sink" patent technology, chip, the heat generated by the direct transmission to the radiator,thermal resistance is very low, only 0.2 °C/W. Other products is "beads + heat conductive fat + circuit board tin layer + copper foil layer + glue layer + aluminum plate layer + radiator heat + bad layer + radiator base + radiator" heat from lamp bead, at least to the radiators after seven ways cut off, heat resistance has as much as 15 °C/W. So DGCLED company products’heat transfer efficiency is a glorious 75 times as much as the other products.              1.2 the convection differences:  DGCLED company used the patent of "independent radiator and penetration the assembly" technology, heat and cold air convection, unimpeded, very quick heat exchang. Other products can only through the side of air heat exchange, the cooling efficiency greatly reduced.              1.3 heat radiation difference: DGCLED's cooling surface mainly in vertical radiator all round, the other products mainly in the heat lamps upper part. Outdoor environment easily to be dust, which can notbe avoided. But for the situation of DGC's product almost no impact, but to othercompany's products of the impact would be fatal.              Excellent heat dissipation performance, greatly prolong service life, reduce the light attenuation          The second:light efficiency advantage             Other products, will be equipped with glass or PC waterproof cover in order to protect the internal electronics, but meanwhile to block the light, which causes the light losses. General speaking, loss of light in 20% or so. However DGCLED company take patent electrical protection measures, removing the blocking glass or PC cover. under the same light efficiency conditions, the technology directly improve light efficiency 20%. comparing it with other company.

 

Products show:

1. Low power consumption, high power efficiency.2. 50,000-80,000 hours lifespan.3. Easy mounting, using existing socket.4. No flickering and FR interference, instant soft start.5. No UV or IR radiation.6. Best thermal emitting with aluminum alloy housing.7. Energy efficient and environmental friendly

Trade Terms

 1.Payment:T/T,30% deposits before production, 70% balance to be paid before deliverying.

2.Production lead time for 100~500pcs:6day, 500~1000pcs:14day.

3.Sample can be delivered in 3 days.

4.Shipping freight are quoted under your requests

5.Shipping port :Shenzhen,Mainland China.

6.Discounts are offered based on order quantities

7.MOQ:1pcs

Applications

 Apply to the main road, slip road, fast lane, residential road, Park Road, Industrial Park Road, highways, local roads, municipal roads, gas stations and car parks lighting places.

Our service1.Your inquiry related to our products or prices will be replied in 24hours.2.Well-trained and experienced staffs to answer all your enquires in fluent English3.OEM&ODM, any your customized lightings we can help you to design and put into product.

Manufactory Advantage

We are specially proud of OEM business since we have a professional LED engineer team who have worked in this field for more than 3 years. Also, our high trained operators that make sure our products are 100% good quality. Professional sales team that offers the best service to our customers. Quality is the most important factor, here, we have one set of strict Quality Inspection system.

  Clients are warmly welcomed to buy our products . You will be satisfied with the quality and prices of our products and our services. Please contact us now.

LED panel light solar wall light

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.