Ads by Google
1. Brief Introduction
AMYFENCE, good qulity galvanized steel fence (Model A ),is the most traditional assembling fence ,you can install and assemble them all by yourself. However ,its' very popular becaluse of the excellent perforamce of Anti-ultraviolet ,anti-corrosion ,rust proof and wethering resistance ability. Besides these ,the traditioanl concise and simple structure desgign makes it is affordable for every familay garden or industrial sites .It is widely applied to garden enclosure ,residential surrounding ,factory or wrokshop perimeter wall ,road two sides ,airport,highwayside barrier ,building camp's temporary enclousure, etc.
2. Advantages & Features
Material: Galvanied hot-dipped zinc steel tubeAccording to customers drawing ,signing or requirements.Colors: All RAL colors are availableGuarantee: 10 years' warranty Installation : Assembling way ,or by yourself.Cost : The concise and simple design make it Lower cost than other design.Size of horizontal rails, Vertical bars , Posts , spacing is optional according to customers' requirement.Anti-corrosion and rust proof :Hot dipped zinc +Rich zinc Phosphatization+ Epoxy powder coating+Polyester Color Powder coating, which all these 4 layer's surface make our 10 years' quality warranty under normal using conditions.3.Specifications
Normal Post size | 50*50*1.5mm 60*60*1.5mm 75*75*1.8mm | Another size is available according to customers drawings or fence design requirements |
Normal Horizontal Rail | 35*35*1.2mm 40*40*1.2mm 45*45*1.5mm | Another size is available according to customers drawings or fence design requirements |
Normal Vertical Bar | 16*16*1.0mm 19*19*1.0mm 25*25*1.2mm | Another size is available according to customers drawings or fence design requirements |
4.Structures
Horizontal Rails(2 pcs) + Vertical Tubes+Square Posts5.Surface Processing
6.Technical Standards
Raw materials standardNO. | PERFORMED STANDARD | NAME OF RAW MATERIALS |
1 | GB700-88 | CARBON STRUCTURAL STEEL |
2 | GB704-88 | HOT ROLLED FLAT BAR |
3 | GB709-88 | HOT ROLLED STEEL SHEET |
4 | GB708-88 | COLD ROLLED STEEL SHEET |
5 | GB3280-92 | COLD ROLLED STAINLESS STEELSHEET |
ITME | DESCRIPTION | STANDARD REQUIREMENT | QUOTED TEST STANDARD |
GALVANIZED COATING | APPEARANCE | Accepted appearance shall be free from nodules, Blisters, roughness,sharp points and uncoated areas | ASTM A787-G90 GB/T 13912-2002 |
COATING THICKENSS | Accessories shall be up to 375 g/m2 (Average 26-30 μm), posts, horizontal rails shall be up to 275 g/m2 (Average 26-30 μm) | ||
POLYESTER POWDER COATING | APPERANCE | Appearance shall be smooth and shiny, firmly adhered, basically neat, without obvious uneven,density impurity , no toughness feeling of hand touch, steel exposure ,buuble, pin hole, obvious trace are not allowed. | |
COATED THICKNESS | Bottom layer: 40μm~60μm ; Surface layer:40μm~60μm | GB/T 13452.2-92 | |
SPECULAR GLOSS | High gloss >85% 55%<Semi-gloss<75% Low gloss <30% | ASTM D523-1999 | |
IMPACT RESISTANCE | 50kg.cm | ASTM D2794-1999 | |
FLEXIBILITY | ≤3mm | ASTM D522-2011 | |
PENCIL HARDNESS | ≥2H | ASTM D3363-00 | |
ADHESION | Not less than grade 1 | ASTM DD3359-97 | |
SALT SPARY RESISTANCE | 3500 hours ,Grade 1 | ASTM B117-97 | |
HUMIDITY RESISTANCE | 3500 hours ,Grade 1 | ASTM D2247-99 | |
WEATHERING RESISTANCE | 1000 hours ;Gloss loss :Grade 1;Discoloring :Grade 1 | GB/T 1865-1997 |
7. Projects
8. Workshop & Processing
Workshop Packing samplesmetal fencing