Product Type

Coating Type

Product Spec.

Substrate Spec.

Coating Designation

Coating Thickness

1.Pre-painted Hot-dip Galvanized Steel Coil (PPGI)2.Pre-painted Hot-dip 5% Al-Zn Coated Steel Coil (PPGF)3.Pre-painted Hot-dip 55%Al-Zn CoatedSteel Coil (PPGL)

1.Polyester2.Silicone Modified Polyester3.Acrylic4.PVDF

JIS G3312(1994)

CGCC, CGCH,CGCD1, CGC340,CGC400, CGC440,CGC490, CGC570

JIS G3302(1998)

SGCC, SGCH,SGCD1, SGC340,SGC400, SGC440,SGC490, SGC570

JIS G3302Z10, Z12, Z18, Z20, Z22, Z25, Z27,Z35

Top Primer:PU or Epoxy 5umTop Coat:15~25umBack Coat:PE or Epoxy 5~12um

JIS G3318(1994)

CZACC, CZACH,CZACD1, CZAC340,CZAC400, CZAC440,CZAC490, CZAC570

JIS G3317(1994)

SZACC, SZACH,SZACH1, SZAC340,SZAC400, SZAC440,SZAC490, SZAC570

JIS G3317 (1994)Y12, Y18, Y20, Y22,Y25, Y27

JIS G3322(1998)

CGLCC, CGLCD,CGLC400, CGLC440,CGLC490, CGLC570

JIS G3321(1998)

SGLCC, SGLC400,SGLC440, SGLC490,SGLC570

JIS G3321 (1998)AZ90, AZ120,AZ150, AZ170

ASTM A755M(2008)

ASTM A653M(2003)

CS TYPE A, B, CFS TYPE A, BSS Grade 230, 255, 275, 340DDS

ASTM A653M (2003)Z100, Z120, Z180,Z275, Z350

ASTM A875M(2002)

ASTM A875M (2002)ZGF90, ZGF135, ZGF180, ZGF225,ZGF275

ASTM A792M(2003)

ASTM A792M (2003)AZ150, AZ165, AZ180

EN 10169(1997)

EN 10142(2000)

DX51D, DX52D,DX53D

EN 10142 (2000)Z100, Z140, Z200,Z225, Z275

EN 10147(2000)

S220GD, S250GD,S280GD, S320GD,S350GD, S550GD

EN 10147 (2000)Z100, Z140, Z200, Z225, Z275

EN 10214(1995)

S220GD DX51D,S250GD DX52D,S280GD DX53D,S320GD, S350GD, S555GD

EN 10214 (1995)ZA95, ZA130, ZA185, ZA200, ZA255

EN 10215(1995)

EN 10215 (1995)ZA100, AZ150, AZ185

Remark

1. Protective Film can be applied2.The ASTM standards presented here adopt the imperial system (The equivalent metric system is marked by the “M” after the specification number, such as A755M and A792M)3.Coating Thickness is for reference only, customized thickness is available.