Welcome to ECVERY
GH Battery Plate Curing and Drying Chamber
GH Battery Plate Curing and Drying Chamber
Supplier Info
[China Supplier]
Contact Person : Mr. CHEN YU
Tel : 86-23-58549598
Fax : 86-23-58558436
Product Detail
1.Curing & drying process for lead-acid battery plates 2.Fully automatic. 3.Fast and efficienct.

GH Curing and Drying Chamber


       GH-1 curing and drying chamber is  an advanced product which absorbed American OSI technology.  As an ideal sunstitute of  imported products,  it could automatically fufill the curing and drying procedure automatically without guarding.

Structure of the equipment

    GH-1 curing and drying chamber  is composed  of main box, heating box,  main machine controller and system control box. And there are hot  air circulating system, heating system, humidification System, temperature& humidity control system  and air inlet&outlet system  between the main box and heating box.

Technical Parameters

Heating: by natural gas, electricity and steam. Humidification: ionized water& steam humidification. Energy consumption:  natural gas: 5~16.1m3/h,thermal efficiency:50~160Kw. Electricity: 90kw (3 groups), steam: Heat exchanging area:83.6m2 .  Control range: curing process: temperature 40~90°C,humidity higher than 95%; drying process: temperature 55~95°C,humidity lower than 10%.Controlling deviation: temperature set value ±2°C,curing humidity :±3%RH.

Supply range

 Electric control cabinet                     1 set

   1.1 touchscreen 256 colors            1 set         MITSUBISHI

   1.2 PLC module: DVP series           1 set         MITSUBISHI

   1.3 frequency converter:  7.5 kw   1 set       KOREA LG

   1.4 High-temperature limit controller          1 set

   1.5 contactors etc.                         1 set            CHNT

2  Temperature/humidity sensor    1 set Japan KYOKUTO

3 Circulating blower

Power: motor 7.5kw  960r/min

Material: stainless steel 1 set

4.   Main box: 1 set

Outside dimension: width 5000mm, depth3500mm, height 2900mm.

Material: Inner surface: 0.5mm stainless steel.outer surface: color steel plate. Middle: Polyurethane.

Structure: assemblying structure, removable.

5 Attached box:  1 set

Dimensions: Width 5000mm, depth 1600mm, heigth 1200mm.

Material: inner surface:0.5mm stainless steel.outer surface: color steel plate. Middle:  Polyurethane, circulating duct: 1.5mm stainless steel.

6,Door: 1 set.  With sealing ring to prevent aging.

7  High-efficient atomizing nozzle 5 pieces; material : stainless steel

8 Water tank:  one set,   material: stainless steel

9 Air distribution screen:   stainless steel  1 set

10    Pipeline  1 set.

GH Battery Plate Curing and Drying Chamber

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.