1,continuous casting machine (CCM) 2,diversified arc radius 3,diversified billet type 4,diversified strand

Our roller used centralized chain transmission,single flow of separate roller,roller and bearing seat through the water cooling.

Our company roller used centralized chain transmission,single flow of separate roller,roller and bearing seat through the water cooling,roller girder use water coolong.Drive unit On both sides of the CCM, avoid the high temperature zone,can be off-line maintenance,reduce the fault and convenient maintenance.Our company roller category:roller forward cutter,after cutting and transport roller,billet delivery table.

Our Continuous Casting Advantages:

High casting speed, automatic secondary cooling water distribution, tubular mold, stable oscillation.

Detail description:

Diversified arc radius, section size 80-200mm, cutting length 3-14m.·Ladle turret is equipped with weighing device, emergency driven unit and variable frequency speed regulation.·Tundish car is equipped with AC electrical motor with variable frequency, hydraulic tundish lifting, and tundish horizontal position centering so that protecting casting and tundish nozzle centering can be easily operated.·Semi-leaf spring oscillator with high oscillating frequency, low oscillating stroke oscillates stably.·Five-roll module withdrawal and straightening unit with continuous straightening technology is to reduce ratio of billet deformation and prevent billet from straightening cracks effectively.·Roller table after torch cutting machine, transport roller table and discharge roller table are driven by concentrated chains.·Discharge system consists of high position pusher and slide rail cooling bed.·The caster is a high configuration machine. Automatic water mating, length cutting, and Human machine interface (HMI) are carried out via electro-automation control system.

------

Standard supply details
Serial number	Device name
I	Continuous casting machine equipment online
1	Ladle turret
2	manipulator
3	tundish car
4	tundish and tundish lid
5	pendular trough
6	emergency launder
7	emergency ladle
8	tundish dryer
9	100×100 mold (customer requirements)
10	mold cap
11	oscillator device
12	withdrawal and straightening machine
13	100×100spraying tube and nozzle (customer requirements)
14	guide section
15	flame cut-off machine
16	cropped ends collection device
17	secondary cooling fan discharge pipe
18	secondary cooling fan
19	dummy bar device
20	dummy bar storage device
21	roller forward cutter
22	after cutting and transport roller
23	billet delivery table
24	terminal fixed baffle
25	fixed shutter
26	skid cool bed
II	Continuous casting machine hydraulic and lubrication equipment
1	the main hydraulic station
2	hydraulic installation material(Such as high-pressure hose)
3	hydraulic station & lubrication equipment
III	Continuous casting machine water system
1	mold cooling water system
2	secondary cooling spray-cooled system
3	Machinery and equipment cooling water system
4	Slag water system
IV	Continuous casting machine off-line equipment
1	alignment template
2	mold maintenance bench
3	tundish drying
V	Continuous casting machine electrical control system

------

Contact Us:

Company: Beijing Shouye Dingli Continuous Casting Engineering Technology Co., Ltd.,AddressXingnan Building, No.136 Xiaohongmen Road, Daxing District, BeijingPos:100076Tel:8610 87915906Fax:8610 87916015

 

 

 

Table roller (CCM)