Ads by Google
1250mm continuous hot dip galvanizing line
1.Description of continuous hot dip galvanizing line:
We can provide hot-dip galvanizing line and hot-dip galvanizing aluminium-zinc line.The hot-dip galvanizing line with American-Steel-Union process, which can produce sheet with small spangles or without spangles. The product has good performance of corrosion resistance and coating adhesion, used widely for manufacture of automobile, household electric appliance, building construction and base plate for color coating etc.
2.Technical Parameter of continuous hot dip galvanizing line:
process method: American- steel – unionmaterial: cold rolled carbon structure steel, qualified carbon structure steel and low alloy steel rollsteel type: 08AL,SPCC,SPCD ,SPCElayer condition: normal spangle, small spangle, skin pass spanglelayer weight: GI:GB/T2518-88layer thickness range(two side): 50—300 g/m2layer control method: air knifetreatment after galvanized: skin pass, stretch, anti-fingerprint coating/chromate coatingcontinuous annealing furnace: horizontal/vertical , electricity, natural gas, coal gas, etczinc pot: main frequency induction heating ceramic zinc potskin pass: four-tandem, bottom support roller AC frequency drivingtension leveler: single bending & single stretching /double bending & single stretching/two bending & two stretching, elongation among 0.5~2.0%driving control: main drive adopt SIEMENS AC complexor frequency control systemquality standard: GI:GB/T2518-2004Material | Thickness | Width | Line speed | Plating Weight | Energy |
Plain carbon steel, Low alloy steel | 0.18~2.0 mm | 300~1250 mm | 50~180 m/min | 80~300 g/m2(Double) | Electricity, Steam |
1250mm Continuous Hot dip Galvanizing Line