Ads by Google
Its standard cross beam length is from 2m to 3m (real cutting length is 1.5m to 2.5m) and longitudinal length is from 3m to 4m (real cutting length is 2m to 3m). It is especially designed to cut these thickness from 0.5~5mm.
Cross Beam Length(X axis) | 2m (can be lengthened according to user’s demand) | |
Longitudinal Rail Length(Y axis) | 3m (Rail can be lengthened according to user’s demand) | |
Effective Cutting Width (X axis) | 1.25m | |
Effective Cutting Length (Y axis) | 2.5m | |
Cutting Mode | Plasma only | |
Drive Mode | Bilateral-side | |
Drive Method | Rack and pinion drive for X and Y axes | |
Flame Cutting Thickness | 5-200mm | |
Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) | |
Cutting Speed | 0-12000mm per minute | |
Moving Precision | 0.01mm per step | |
Power Source(option) | 220V 50Hz 500-1000W | |
Nesting Software (option) | INTERGNPS, FASTCAM | |
Cutting Gas | Acetylene, Propane | |
Plasma Gas | Pressed air, Oxygen, N2 | |
Marking Tool | ||
Torch Height Controller (AUTO) | CHC600 | Capacitive height control for flame cutting |
PHC330 | Arc voltage height control for plasma cutting |
Steel plasma cutting machine