Ads by Google
YITAI MULTI-FUNCTION FOLDER GLUER
High efficiency, saving space,(high speed,easy operation,saving time&effort)
operation introduction:
Machine Specification:2000mm*1680mm*1400mm Belts was designed for continuous and stable feeding.The front board feeding gap should be 1.5 times bigger than the paper’s thickness.Adjust the left and rear board
The fixed right board can save much adjusting time on changing size between left and right board.Adjusting the rear board and leave 2 feeding paper’s space over it.1 Voltage:220-380v Power:2-1/2HP
2.The left digital table is used to adjust the paper feeding speed.
3.The right digital table is used to adjust the conveying speed after it shaped,and the speed should be less than the paper feeding’s speed.
Type:YT-168 Paper-out Section
The glue-coated section adjusting
The first carton should be feeded with a jog speed by the foot pedal controller. When it comes to the glue-coated section, adjusting it to the place where the glue won’t be overflowed.
Scraping glue adjusting
Equipped a scraping blade in the scraping glue section, it is easier to adjust the difference thickness of the glue in the whole paper, and at the same time, can save a lot.Adjust the upper wheel gap according to the coated-glue’s planeness.Shaping Operation
After shaping by hands, convey it to the belt then it can be quickly assembled.
OutputL40-65sheets/min)
The conveying of the finished products
Machine weight: 900kg Production speed: 100m/min
Paper thickness: 2mm-10mm
Paper feeding size: max 1100*1680
Min100*180(mm)
MULTI-FUNCTION FOLDER GLUER