1.high pressure system of 420mpa 2.CE standard 3.very stable and durable during processing 4.best components and good price

 ZHONGBO water-jet machines have been used diffusely and expert in metal cutting ,glass cutting,marble cutting,and aslo other any materials cutting.

There are several advange comparing other machines:

It can control piercing in lower pressure and cutting with high pressure(up to 3800Bar) automaticly,with this function can resist the breakable material chipped durning the piercing time.It can control the abrasive flow rate in percentage by cnc controller accurately,with this function can resist the sand closed in the nozzle and water goes to the sand,it can also extend the life of nozzle and save a lot of sand.It is 3 axis cutting machine ,can control cutting head up and down automaticly when finish one part and going to next part,with this function can protect the nozzle with not be broken by the risen free parts.It is a very smart machine with perfect CNC control system.We have difference models in the high pressure system,you can choose TEENKING PUMPin A-class(50HP,4200Bar),B-class(40HP,3600Bar),C-class(30HP,3000Bar),or KMT PUMP in model Jet-Line(50HP,4200Bar),KMT pump in model Stream-Line Pro 60(60HP,6200Bar),or Accustream PUMP(50HP,4000Bar).We have the newest advanced machine:5 axis cutting machine with dynamic cutting head,it can give compensation automaticly following the drawing program due to the taper of the water cutting.

model		ZB420-0608C
travel of each axis	X-axis	650mm
	Y-axis	850mm
	Z-axis	220mm/320mm (optional)
cutting range	X-axis	600mm
	Y-axis	800mm
	Z-axis	200mm/300mm (optional)
drive motor		AC servomotor with coder (Panasonic, YASKAWA or FUJI)
drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stageThree-axis full servo drive (available of cutting 3D graphics)
maximal workpiece weight		4000kg (500kg/m2)
CNC control system		water-jet cutting control system
control precision		X-axis, Y-axis, Z-axis: 0.001mm
reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
cutting tolerance		Less than ±0.05mm
plane straightness accuracy		Less than ±0.05mm
plane verticality		Less than ±0.04mm/300mm
moving speed		0-18m/min.
cutting speed		0-15m/min
water and dust proof		All motion parts are tightly protected against water and dust, the  casing of the CNC cutting platform is totally stainless steel.
protection of power break		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
lubricating system		the fully-automatic lubricating system does not need any manual operation, automatically lubricating all movement component.
water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
sludge removal system		hydro forcing the settled sludge toward all directions during the cutting, and sucks it from the pre-embedded pipelines into the sludge removal system, greatly saves the cost due to manual operation and machine stop time. (optional)
automatic abrasive supply system		use air pressure to continuously, stably deliver abrasive from an externally-mounted bulk to the cutting head. (optional)

Water Jet Machines