IGBT induction furnace 120KW for forging steel billet
Machine featuers:
1. Based on electromagnetic principle, the machine can penetrate nonmetal materials, while heating metal materials instantly.
2. IGBT, MOSFET power accessories made by SEIMENS are adopted, which is unique in AC control
3. Environmental products. Less oxide layer.
4. Easy operation .It only takes a few minutes to learn to operate the machine, and it can run continuously in 24hours
5. A level of 1000 Degrees Celsius can be reached in a few seconds , It is capable of automatic and manual type with control of output power.
6. The machine is equipped with alarm lamps, for instance, over voltage, over current, water shortage, and lack of any of the items above will cause the machine to pause automatically , while at the same time alerting message is sent.
WH-VI-120 KW induction furnace
Composition: a geneartor and a transformer
Accessoreis: inductor , telecontrol switch and opearting insruction.
Main technical paramters of WH-VI-120KW:
1. Work power: 3 phase 380V/50-60HZ
2. Max input power: 120 KW
3. Max input current: 165A-220A
4.Oscillation frequency: 10-35KHZ
5.Continuous load rate:100%
6.Efficiency:100%
7.Cooling water pressrue:0.1-0.3mpa
8.Cooling water flow-geneartor 29L/min(0.2mpa)
transformer 22L/min(0.2mpa)
9.Net weight-generator 85kg+/-5%
transformer 90k+/-5%
10.Dimension(length*width*height):geneartor 650*520*1100mm
transformer 500*800*580mm
11.Color:blue/white
12.Particular recommended: metal heat treatment,steel billet induction heating for forging ,etc.
13. Water temperature protection point: 50 degree celsius
Machine application:
Surface hardening,through heating for forging,induction brazing, annealing ,small scale melting
Use case:
A.duction furnace for forging
B.Seel billet : diamter 30-60mm
C.heating temperature:1260 degree celsius
D.Heating time requirement: up to 5 minutes
Recommendation: Model WH-VI-120KW induction furnace.
More information about high frequency induction furnace,please contact us.
igbt induction furnace for forging steel billet