Rebar End Upsetting Machine: 1. Pressure Range: Dia. 12-40mm 2. Oil Pressure Flux: 6.3L/min 3. Power: 4 KW

Rebar End Upsetting Machine:

1. Makeup

The Rebar Thread Cutting Machine is one part of the Upsetting & Parallel Thread Cutting System. The Upsetting & Parallel Thread Cutting System has three sets of machine in total:

1 set of Rebar Thread Cutting Machine

1 set of Rebar upsetting machine

1 set of oil pump

2. The procedure of this system is as follows:

1) Rebar upsetting machine is used to enlarge the Dia. of rebar.

2) Then use rebar thread cutting machine to cut threads on the enlarged end of rebar

3. The parameter of Rebar Upsetting Machine is as follows:

Pressure Range: 12-40mm

Oil Pressure Flux: 6.3L/min

Max Pressure: 63Mpa

Power: 4 KW

Net Weight: 620kgs

Dimension: 1225*570*1100mm

Rebar End Upsetting Machine