MH 250W Lamp
Lamp type : Metal Halide Lamps-UPS
Control Gear : Mercury Ballast+ ignitor or Electronic Ballast
Lamp Lumens Per Watt :72
Colour Rendering Index (CRI) or (Ra) : 70
Bulb Diameter (mm): 46
Max. Overall Length (mm): 210
Light Centre Length (mm): 136
Max. Base Temperature (°C):250
Max. Bulb Temperature (°C):400
Pulse Position (Electrical Degrees) : 60°-240°,240°-270°
Note: The specification contains date about typical performance on 50/60Hz sine wave ballast at nominal power.
Actual values may depend on ballast and applications. Lamps will start and operate with a 10% reduction in rated supply voltage when the correct control gear is used, however to maximize lamp survival and lumen maintenance the supply voltage and ballast design voltage should be within +/-3%.
Supply varations of +/-5% are permissible for short periods only.
The’Live’phase/line connection from the supply must be connected via the bllast/ignitor to the centre contact of the lamp base. (Nomimal color temperature is based on horizontal operation of the lamp.Off-horizontal positions result in warmer color temperature.)
High quality MH 250W lamp