mechanical seal rings, High Quality China mechanical seal rings Suppliers and Manufacturers

mechanical seal rings

Supplier Info

Sichuan Guanghan Nandong Metal Material Co., Ltd.

[China Supplier]

Contact Person : Ms. Liu Michelle

Tel : 0086-0838-5631888

Fax :

Product Detail

Tungsten sealing ring As customer's drawing, may produce the ring of finished and the blank, any design avaialalbe, tengsten

Tungsten carbide seal ring:

Materials: hard alloy and non-ferrous metal Used in geological prospecting, machinery/tool manufacturing and serves as drill bit in wind drill and electric drills for coal digging Fit for precision lathe are used in nonstop cutting of die-cast iron Semi-precision, precision, and small-section precision lathes are used in interrupted cutting and whirling of rough turn C/O available;

Type	Figure	Model No.	Dimension
Type	Figure	Model No.	D	d	H
Flat ring		PHD×d×H	10~350	2~300	3~80
Ring with outer Shoulder		YTD×d×H
Ring with inner Shoulder		NTD×d×H
Ring with inner- Outer Shoulder		NYD×d×H
Groove ring		CHD×d×H
Other seal rings		QTD×d×H

Other processing: chamfering, R or rectangular radial grooves on the end face, pin holes for face rotation-prevention, circumcircle axial rotation prevention R or rectangular grooves, end face with other geometry, polishing etc.

Grade	Equal to ISO Category Number	Performance			uses
		Density	Bend Strength	Hardness
		G/Cm3	N/mm2	HRA
YG3	K01	14.9-15.3	1180	≥90.5	sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles.
YG3X	K01	15.1-15.4	≥1300	≥91.5
YG6X	K10	14.8-15.1	≥1560	≥91.0	Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6A	K10	14.7-15.1	≥1580	≥91.0
YG6	K20	14.7-15.1	≥1670	≥89.5	Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8	K20-K30	14.6-14.9	≥1840	≥89	Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.

mechanical seal rings