straightening and cutting machine: straightening and cutting of aluminum coils in producing auto radiators, condensers, cooler

straightening and cutting machine

 

Tube Coil Straightening and Cutting Machine

Main Features

The driving system works with a servo motor. The raw material is conveyed by a precision linear guidance rail. The cutting is conducted through the revolving knife or or linear knife. The

machine employes a fully-automatic decoiler. The machine has a high straightening and cutting accuracy.

Technical Parameters:  

      Production rate: 2.5 seconds per time (based on 650mm)

      Feeding quantity: 2 pieces per time;

      Tube straightening range: tube thickness from 1.5-3mm;

      Tube width: 14-32mm

      Minimum cutting length: 100mm 

      Tube straightening accuracy: same length, accuracy <±0.2mm

      Straightening accuracy: widthwise: <0.1mm/850nn

      Thicknesswise: <0.5mm/850nn

      Replacement time of coils: 3min

      Time gap for changing the processing width:≤15min

      Cutting knife replacement time:≤5mins

      Air source pressure: 0.6mpa

      Main Machine Overall dimension: 6000×850×700mm(the length is 15m if the decoiler is included.)

servo type aluminum tube coil Straightening and Cutting Machine