Ads by Google
automatic wire straightening and cutting machine
Introduction
Our wire straightening and cutting machine has been sold to many countries all over the world and got good feed back from our customers because its high quality and excellent performance
Usage
The wire cutting machine is used to straightening galvanized wire or rebar, and then cut it into the needed length. It can do a prepare work for the wire mesh welding machine. So it is widely accepted to the factory who is dealing wire wires and wire mesh. Also widely used in construction area.
.
Features of our machine:
1. Fast in straightening and cutting: our machine adopts German technology and could reach a highest straightening and cutting speed of 110m/m, 3 times that of domestic similar products.
2. Accurate measurement : the main character of our product is accurate measurement , with error less than or equal <=±1mm.
3. Precise straightening : the straightness of straightened steel wire is ±1mm/m, higher than that of similar products.
4. Low failure rate: as parts of products are accurately processed and our quality control is strict, our products could operate without failures for a long time under normal conditions after debugging.
5. The processed wire diameter can be according to orders. Minimum size is 1mm, maximum size is 16mm.
Main parameter
Model | Wire Dia. mm | Cutting Length | Speed m/min | Power | Weight | Dimension mm |
CT0.3-1 | φ0.3- 1 | 300-600 | 54-108 | 1.1kw | 100kg | 1000*500*700 |
CT1.6-6 | φ1.6-6 | 600-6000 | 110 | 2.4kw | 1000kg | 7750*600*1260 |
CT3-8 | φ3-8 | 100-6000 | 40 | 5.5kw | 700kg | 7250*550*1150 |
CT5-12 | φ5-12 | 2000-12000 | 40-60 | 12.1kw | 1500kg | 13770*535*1457 |
CT4-14 | φ4-14 | 800-12000 | 40 | 11.5kw | 1450kg | 1430*700*900 |
CT5-12T | φ5-12 | 1000-12000 | 120 | 30kw | 5000kg | 18000*5000*2000 |
CT6-16 | φ6-16 | 3000-12000 | 120 | 24kw | 3500kg | 14000*500*1260 |
automatic wire straightening and cutting machine