Welcome to ECVERY
OEM MIG welding machine MIG 500/ High quality, Fresh technology, low price
OEM MIG welding machine MIG 500/ High quality, Fresh technology, low price
Supplier Info
[China Supplier]
Contact Person : Ms. Woo Lisa
Tel : 86-755-83322229
Fax : 86-755-25121578
Product Detail
17~39V safety Volt when use; MPU been used in design and manufacture; Good QC system; 7~8 years life time from OEM factor

MIG 200S

 

 

Technical Features:* IGBT inverter technology,Current-mode control,reliable quality,Stable performance * Closed loop feedback,Constant voltage output,Resistance to nets pressure fluctuation ability(±15%) * Electronic reactor control,stable welding process,small splash,deep molten pool,good forming * Arcs slow wire,ball cutting after welding,ensure arc success rate * Apply more than 0.8 mm thickness, plate welding * Small volume, light weight, easy operation,economic and practical Main Technical specifications

MODEL/ITEMUnitMIG-350
Supply voltageVAC380V±15%
Rated Input PowerKVA12.5
Range of welding current regulationA50-350
Output voltageV15-36
Rated output currentA350
Rated output voltageV36
Duty cycle%60
Power factor 0.9
Efficiency%85
Send silk machine form Segregate
After blow times1
Welding wire dish diametermm270
Welding wire diametermm0.8-1.2
Outlook sizemm760×313×500
Weight of machinekg35
Plate thicknessmmAbove 0.8
Insulation grade F
Outer covering protection rank IP23

About our factory

MPU is been widely used in our Circuit Board.

Science has bring us the good life and safety job. And in here Engineer in our company will show you how they change the orginal MMA welding machine into the TOP 1 MPU welding machine.

You may still only remember the old times welder with heavy copper billet, and I am sure you never want  move them once they was put on the ground.

Now you can carry out MMA 120 like  a bag, with complex IC and MPU board, the welder is light like a book bag. and you never be afraid of lost your welder cause no too much copper in it.

Quality Control & Test

There are some feature of our product which I can not hide it. Cause every one in this line want to know our scret. One of them is our quality cintrol system. Our MPU board will avoide the damade from over load or over current by mornitor the current and temperture in side the machine. And other system and quality of the cells we use make the welder work good; and most important thing is al the sercurity system make sure problem happend in only 1 circuit board, the Control Board. And this make the fix and change very eazy.

 

 

Your letter is been expected for quotation and anyother purpose.

and your letter will be replyed within 12 hours.

OEM MIG welding machine MIG 500/ High quality, Fresh technology, low price

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.