Ads by Google
tungsten carbide rod
Our carbide rods are used for cutting aluminium alloy, cast iron, stainless steel, refractory alloy steel, nickel-based alloy, titanium alloy and nonferrous metals.Various carbide grades with stable properties have been widely recognized by worldwide tool makers.
Advanced technology, automatic pressing, HIP sintering and precision grinding;
Advantages:
1.
For PCB drills, drills, end mills & reamers, mold punches, core pins & hole drilling tools;
2.
Sub-micron FM18-H features in high wear resistance, toughness & combination abilities;
3.
Advanced technology, automatic pressing, HIP sintering and precision grinding;
Material Properties Chart
Grade | Density g/cm3 | T.R.S MPα | Hardness HRA | Performance & application recommended |
MB6 | 15.0 | 91 | 2600 | For turning, milling, reaming and plaining gray cast iron, light metals, plastics, synthetic material with hardness up to 200HB. Suitable for shearing, and has its good toughness under conditions of high stress. |
MB8 | 14.7 | 90 | 2800 | Applicable to the production of cemented carbide wear-resistant parts, mandrel rods, mould-made; as well as the production of cast iron, non-ferrous metals, non-metallic materials under low-speed semi-finishing and finishing tools. |
MB6X | 15.0 | 92 | 2500 | Suitable for the production of a whole range of solid carbide tools, for processing the cold cast iron, heat-resistant alloy steel, non-ferrous metals and non-metallic; as well as wear-resistant parts with higher requirement. |
MB10X | 14.4 | 91.5 | 3500 | .Applicable to the production of solid carbide tools and PCB drill. High universility, can be used for steel, cast iron, stainless steel, heat-resistant steel, nickel-based alloys and other materials processing. Comprehensive performance and good stability, for twist drill and end mill, is preferred alloy tool materials. |
If you are interested in any of our products, please contact us immediately.
solid carbide rod(finished) OD12*100