.This machine has many functions and is widely used. It is applicable for die work shop and mechanical processing workshop.

1.Both shells of the milling head have precise positioning wedge pin. When the milling head is at horizontal or vertical position, the precise positing can ensure the main shaft to be precisely horizontal or vertical with the worktable.

2. All crucial transmission parts are made of alloy steel and are specially treated. The easily worn parts are made of wearing materials. The machine guiderail has protective device for scraps. All these ensure the machine a enough long lifespan.

3. The easily wearing parts has adjustment device to remove clearance, which ensures the precision and stability of the machine.

4. The crucial transmission shafts and main shafts are installed on the rolling bearing, which improves the transmission efficiency. And the rolling bearing on the main shaft is adjustable, which ensures the precision of the main shaft.

5. Along vertical direction, use ball screw transmission with advantages of light manual-adjustment, stable precision and hard wearing. It is also set with unidirectional self-locking mechanism to prevent the machine from sliding down under the function of weight. Along the horizontal direction, there are two handles specially located at the front and the side which is easy to operate and can reduce unsafe factors.

6. Different combination of two swivel angels can adjust the main shaft to any required angel and thus realizes processing without space limitation.

X6332
Worktable Working Surface Size (W*L)	mm	320*1320
Max Lengthwise Stroke of Worktable (manual/motorized)	mm	700/680
Max lateral Stroke of Worktable (manual/motorized)	mm	300/280
Max Vertical Worktable Stroke(manual/motorized)	mm	400/360
No. of T-slot		3
With of T-slot	mm	18
T-slot Spacing	mm	60
Spindle
Spindle Hole Taper		7:24
Serial No of Spindle		ISO NO40
Swivel Angle of Swivel Milling Head		Any angle
Back-and-Front Moveable Distance	mm	480
Size of Space between Components
Distance between Center Line of Horizontal Main Shaft and Worktable Surface
With Cutter Holder	mm	35~400
Without Cutter Holder	mm	0~795
Distance between Vertical Main Shaft End and Worktable Surface	mm	10~360
Distance between Center Line of Horizontal Main Shaft and Vertical Guiderail	mm	20~500
Distance between Vertical Guiderail and Center of Worktable Surface	mm	210~490
Machine Performances
Spindle Rotation Speed Grade		12
Spindle Rotation Speed Scope	r/min	40~1950
Worktable Feeding Grade		9
Lengthwise Feeding Amount Scope of Worktable	mm/min	15~430
Lateral Feeding Amount Scope of Worktable	mm/min	15~430
Vertical Feeding Amount Scope of Worktable	mm/min	5~143
Fast Lengthwise & Lateral Movement Amount of Worktable	mm/min	3070
Fast Vertical Movement Amount of Worktable	mm/min	1023
Power, Volume, Weight
Main Drive Motor Power	kw	5.5
Main Drive Motor Rotation Speed	r/min	1440
Feeding Motor Machine Power	kw	1.5
Feeding Motor Rotation Speed	r/min	1400
Cooling Pump	kw	0.085
Cooling Pump Motor Flow Rate	l/min	20
Overall Dimensions(L*W*H)	MM	2000*2100*2300
Machine Weight	kg	3000

Universal Milling Machine