Ads by Google
Ram Type Milling Machine
| Model | Unit | RUM460 | RUM500 | RUM560 | RUM600 | RUM630 |
| Working table(W×L) | mm | 460×1435, 1635, 2000 | 500×1435, 1635, 2000 | 560×1435, 1635, 2000 | 600×1435, 1635, 2000 | 630×1435, 1635, 2000 |
| T-slot Number | 5 | 7 | ||||
| Width | mm | 18 | 22 | |||
| Pitch | mm | 80 | 80 | |||
| Travel of three directions Longitudinal | mm | 1100, 1300, 1500 | 1100, 1300, 1500 | |||
| Cross | mm | 650 | 800 | |||
| Vertical | mm | 470 | 500 | |||
| Min. distance between spindle nose and table surface | mm | 40 | ||||
| Swivel angle of milling head | Any 360° in front half-sphere | |||||
| Spindle taper | ISO50 | |||||
| Spindle speed Range | rpm | 30~2050 | 36~1820 | |||
| Number | 27 | 18 | ||||
| Feed range of table and ram longitudinal | mm/min | 10~1000 | ||||
| Cross | mm/min | 10~1000 | ||||
| Vertical | mm/min | 6~640 | 5~500 | |||
| Rapid feed of table and ram longitudinal | mm/min | 2200 | 3000 | |||
| Cross | mm/min | 2200 | 3000 | |||
| Vertical | mm/min | 1466 | 1500 | |||
| Feed number of table | Infinitely variable | |||||
| Main motor Power | kw | 7.5 | 11 | |||
| Speed | rpm | 1440 | 1450 | |||
| Feed motor Torque | Nm | 30 | X,Y:25, Z:30 | |||
| Speed | rpm | 1500 | 1500 | |||
| Rapid feed motor Power | kw | 3 | ||||
| Speed | rpm | 1500 | ||||
| Max. bearing weight of table | kg | 1500 | 2000 | |||
| Overall dimensions (L×W×H) | mm | 2100×2421, 2621, 2986×1950 | 3130×2135, 2335, 2700×2260 | |||
| Net weight | kg | 3300, 3500, 3700 | 9200, 9400, 9600 | |||
Ram Type Milling Machine