Welcome to ECVERY
Raw material millnamed Bailing,enjoying good reputation among our customers
Raw material millnamed Bailing,enjoying good reputation among our customers
Supplier Info
[China Supplier]
Contact Person : Mr. Chen Wanling
Tel : 0086-371-67996061
Fax : 0086-371-67996062
Product Detail
Raw material mill: 1.Both dry and wet grinding types available 3.Low energy consuming 4.ISO9001:2008 and 3c

Raw material mill are sent to enter the mills feed-in the moment the waste gas hot wind from the bottom of the suspending pre-heater kiln through the air intake is sent to enter that installation as well, where raw materials containing water starts to exchange heat. Raw materials are sent to the dryer where materials are gotten to be dry by intense heat exchange for the special spreading board within which spreads materials. Dry materials (still containing some water) pass the partition with the spreading board and enter the crudely milling cabin. Here raw materials are shattered by the grinders impacts and the grindings and further dried. Granule materials shattered to certain extents pass the grate to enter the middle unloading part, and then are ejected at exit cover with materials from refinedly milling cabin through the tubes unloading hole. The ejections are transmitted to powders selecting machine to divide. A few of divided crude powders pass the feed-in and then back to the crudely milling part a second time to increase the materials liquidity; while most of crude powders through the feed-in enter the refinedly milling cabin where crude powders are grinded more and further by grinders of small diameter and dried a second time by the mills hot wind through the feed-back at the same time. The new ejections conduct such circulation mentioned above one more time.

Main Technical Parameters:

No.

Product specifications (m)

Productivity (t / h)

Mill form

Transmission form

Power (kw)

Reducer

Weight

Weight

Model

Ratio

(t)

1

φ2.2×7m

12-13

Lap -

Center

380

ZD70

5

54

2

φ2.4×7m

15-17

Lap -

Center

475

JR75

4.74

70.5

3

φ2.4×8m

16-18

Lap -

Center

475

JR75

4.74

78.5

4

φ3×9m

42-47

Lap -

Center

1000

MBY800

7.1

156.5

Excluding motor

5

φ3.2×9m

62-65

Lap -

Center

1250

MBY900

7.1

184.5

Excluding motor

6

φ3.8×7.5m

80

Lap -

Center

1600

JDX900

5.6

233

7

φ4.6×10+3.5m

190

Lap -

Center

3550

JQS3550

15.1

358

8

φ4.6×10.5+3.5m

210

Lap -

Center

3550

JQS3550

15.1

360

 ModelSpeed of bucket (r/min)Weight of ball (t)Size of feed opening (mm)Size of output size (mm)Production (t/h)Power (kw)Weight (t)
φ900×1800381.5≤200.075-0.890.65-218.53.6
φ900×3000382.7≤200.075-0.891.1-3.5224.6
φ1200×2400323.8≤250.075-0.61.5-4.84512.5
φ1200×3000325≤250.074-0.41.6-54512.8
φ1200×4500327≤250.074-0.41.6-5.85513.8
φ1500×3000278≤250.074-0.42-59017
φ1500×45002714≤250.074-0.43-611021
φ1500×57002715≤250.074-0.43.5-61322407
φ1830×30002411≤250.074-0.44-1018028
φ1830×64002423≤250.074-0.46.5-1521034
φ1830×70002425≤250.074-0.47.5-1724536
φ2200×55002130≤250.074-0.410-2237048.5
φ2200×65002130≤250.074-0.414-2638052.8
φ2200×75002133≤250.074-0.416-2947556
φ2400×300020.615.5-15.6≤250.074-0.415-55 24559 
φ2400×45002130≤250.074-0.415-60380 65 
φ2700×400020.640≤250.074-0.420-80 400 94
φ2700×450020.748≤250.074-0.420-90 430 102
φ3200×45001865≤250.074-0.4According to different tech800  137

Raw material millnamed Bailing,enjoying good reputation among our customers

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.