Welcome to ECVERY
2012 New Mining machine with the best quality
2012 New Mining machine with the best quality
Supplier Info
[China Supplier]
Contact Person : Ms. Tang Ashely
Tel : 86-0773-8552008,8552139
Fax : 86-0773-8552662
Product Detail
1.Mining machine with ISO9001:2008 approved 2.Particle size form 80~600 mesh 3.Patent no: ZL2011201414398 4.2~25t/h

The Technical characteristics of 2012 New Mining machine with the best quality

1. reducer adopting new deceleration device:main engine revolution may according to the different working conditions, can be adjusted main engine revolution, to adapt to different hardness materials.

2.shovel material using super large: use the big Shovel blade, makes the material tackles the into grinding roll and a magic ring between grinding. 

3. classifying precision: using super-large grading turbine, percent of pass is high, deal with big air volume. And grading impeller end and powder outlet end forming palace type sealing, the system doesn't easy to form short-circuit powder, classification precision is high.

4. double whirlwind: the parallel double whirlwind collector, collecting efficiency over 80%, than the single tornado collector5%-- 10% collection efficiency. 

6. carrying ability: blower adopts high voltage centrifugal fan, air volume and air pressure increases, greatly improve the pneumatic conveying capacity.

7. afterwind adopts baghouse collecting, no dust pollution.

Main technical parameters of 2012 New Mining machine with the best quality

Maximum feeding size

Finished granularity


(According to different materials fineness)

Center shaft speed

Grinding ring inside diameter

Roll grinding size


Total weight

Total power

30 mm

80~600 mesh

2000~13000 kg/h

112 r/min

φ1270 mm


28 t


Working Principles of 2012 New Mining machine with the best quality

Firstly, raw material is crushed by jaw crusher to the size required, and then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind. After this, the ground stuff is carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The airflow system is closely sealed up and circulated under condition of negative and positive pressure.

Production Process of 2012 New Mining machine with the best quality   Users' Picture of 2012 New Mining machine with the best quality ISO9001:2008Certificate of Mining machine  Main technical parameters of  Mining machine

2012 New Mining machine with the best quality

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.