Welcome to ECVERY
New 2flute Ball nose carbide end mill cutter
New 2flute Ball nose carbide end mill cutter
Supplier Info
[China Supplier]
Contact Person : Mr. Chen Marbo
Tel : 86-769-81501158
Fax : 86-769-85306059
Product Detail
2flute ball nose end mill HRC 45 ,55 and 60 available ALTiN coating Diameter from 0.2mm to 20mm 2flute and 4flute offer

2flute ball nose end mill HRC 45 ,55 and 68 availableALTiN coatingDiameter from 0.2mm to 20mm2flute and 4flute offer

HRC 55 Degree Ball nose carbide end mill

Flute DRFlute LLShankFluteOrder number
1.0R0.525032IG0131
1.0R0.52.05042IG0132
1.5R0.753.05032IG0133
1.5R0.753.05042IG0134
2.0R1.04.05032IG0135
2.0R1.04.05042IG0136
2.5R1.255.05032IG0137
2.5R1.255.05042IG0138
3.0R1.56.05032IG0139
3.0R1.56.05042IG0140
3.5R1.757.05042IG0141
4.0R2.08.05042IG0142
1.0R0.52.05062IG0143
1.5R0.753.05062IG0144
2.0R1.04.05062IG0145
2.5R1.255.05062IG0146
3.0R1.56.05062IG0147
3.5R1.757.05062IG0148
4.0R2.08.05062IG0149
4.5R2.259.05062IG0150
5.0R2.510.05062IG0151
5.5R2.7511.05062IG0152
6.0R3.012.05062IG0153
7.0R3.514.06082IG0154
8.0R4.016.06082IG0155
9.0R4.518.075102IG0156
10.0R5.020.075102IG0157
11.0R5.522.075122IG0158
12.0R6.024.075122IG0159
14.0R7.028.0100162IG0160
16.0R8.032.0100162IG0161
18.0R9.036.0100202IG0162
20.0R10.040.0100202

IG0163

New 2flute Ball nose carbide end mill cutter

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.