Welcome to ECVERY
ISO9001-2008 CTB Wet Magnetic Separator in Hot Sale!!!
ISO9001-2008 CTB Wet Magnetic Separator in Hot Sale!!!
Supplier Info
[China Supplier]
Contact Person : Ms. juan xiao
Tel : 86-0371-87026122
Fax : 86-0371-87026123
Product Detail
Wet Magnetic Separator 1.Improve the grade by 4-6% 2.Improve the recovery rate by 8% 3.Increase capaity by 12% 4ISO9001-2008

 ISO9001-2008 CTB Wet Magnetic Separator in Hot Sale!!!

Wet Magnetic Separator

Wet Magnetic Separator introduction:

The Magnetic Ore Separator is suitable for wet magnetic separation of materials less than 3mm such as magnetite, calcined ore, etc. and it can remove the iron in the coal, non-metal and construction industries.

Wet Magnetic  Separator structure:

Its magnetic system is a ring-shape chain closed magnetic circuit with energizing coils made of copper tube and cooled internally by water. Grooved plates made of magnetic conductive stainless steel are used as magnetic matrix. It possesses the following advantages: short magnetic circuit, little magnetic flux leakage, high magnetic intensity, low energy consumption, fine beneficiating results, simple structure and easy to maintain.

Wet Magnetic Separator working principle:

When slurry flows into trough across ore-feeding tank, loose ore particles enter then trough’s ore-feeding zone under waterflow of ore-feeding hosepipe. Upon magnetic field effect, magnetic particles get together and form into " magnetic mass" or " magnetic linkage", which is absorbed to the cylinder under magnetic forece when it moves toward magnetic pole. Because the polarity of magnetic pole is alternatedly disposed along the cylinder’s rotation direction and remains unchanged at work, gangue and other non-magnetic minerals among " magnetic mass" or " magnetic linkage" fall off when the cylinder rotates.Then the " magnetic mass" or " magnetic linkage" absorbed to the cylinder surface comes out as ore concentrate.  Then the ore concentrate is unloaded into concentrate trough under under waterflow of ore-unloading hosepipe, when it moves to the marginal magnetic system with lowest magnetic force along the cylinder rotation. And non-magnetic or weak magnetic minerals left in the slurry is discharged out of trough, which is called gangue.

Main Technical Parameters of Wet Magnetic Separator

ModelMagnetic intensity(oe)Productivity(t/h)Motor power(kw)Weight(kg)

Main Technical Parameters of Dry Magnetic Separator 

Basic dataModel
Cylinder diameter×length MMø320×600ø320×600ø320×600ø320×600ø404×800ø404×800
Max. magnetic induction350011003500110-3000-3500110-3000-3500110-3000-5000
Cylinder quantity112334
Cylinder rotation speed r/min66.47.3366.47.3366.47.3334.5-17254.5-17254.5-172
Sorting size mm0.05-250.063-250.05-250-80-80-8
Motor modelY801-4Y801-4Y801-4ZBW-1.5ZBW-1.5ZBW-1.5
Power (kw)0.750.750.751.11.52.2
Weight (t)0.250.650.
RemarkFine selectionCoarse selectionFine selectionWith vibrating feederWith vibrating feederFine selection

ISO9001-2008 CTB Wet Magnetic Separator in Hot Sale!!!

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.