Welcome to ECVERY
High Efficiency T-Sepax Separator
High Efficiency T-Sepax Separator
Supplier Info
[China Supplier]
Contact Person : Ms. Zhao Fiona
Tel : 86-371-67983688
Fax : 86-371-67859758
Product Detail
T-Sepax Separator -Easy to maintain -Hig Efficiency and good quality -lower consumptaion and durable -Stable Performance

 Brief Introduction Of T-Sepax Separator

T-Sepax Separator obtains international advanced technology as well as many proprietary intellectual property rights.The separator is simple and low-cost,it can greatly improve the outpur of grinder mill.The internal structure is reasonable,the separating efficiency is high,the enery saving result is apparent,so it is the first choice for grinding system and a new trend.

 Working Principle of T-Sepax Separator

In the working status,the speed regulating motor drive vertical shaft rotation through transmission device.The material is fed into the separating room through the feed port located in the upper part of the machine, then the material falls to the scatter plate through the ductwork locacted between the collection cone above and collection cone below.The scatter plate rotate with the vertical shaft,the material is scattered around under the effect of centrifugal force,the coarse particles of the material is threw to the internal wall under the action of high-speed airflow which is blowed by the an external fan.After collision,the material fall into the collection cone along the internal wall.The rest of the paricles are rolled up,another part of the material is threw to the internal wall and fall into the collection cone for collision with the vanes.

Middle-coarse powder and fine powder continue to rise and pass through the vertical guide vanes under the action of high-speed airflow,then blow into the second classfier zone.The material is threw to the vertical guide vanes under the effect of centrifugal force in the rotating cage type rotor,then fall into the collection cone and are discharged through pipeline.The fine powder that meet the requirements enter the interior through the rotating cage type rotor,then slip into the collection cone with circulated air.

Technical Characteristics and Advantages

Compared to the traditional separator,the T-Sepax has the following advantages:

There are three kinds of output size,coarse powder(d>150µm),middle-coarse powder(60µm<d<150µm),fine powder(d<60µm).The coarse powder returns to first warehouse,the middle-coarse is sent to grinding warehouse(also can be sent to the first warehouse with the coarse powder),the fine powder as finished goods is sent to the storage.T-Sepax separator has a higher capacity compared with similar size of centrifugal separator,cyclone separator and rotor separator,so it is more suitable for mass production.Advanced and reasonable structure allow blastvolume,output and feeding amount change in a wide range without affecting the classifier efficiency,the classification performance is very stable.Advanced classification principle.Combination of kinds of classifier,using aerodynamic analysis methods to design the separator,so the device significantly reduces the resistance and has a stable separating efficiency.Energy-saving is obvious.The rotor of the separator contains the eddy current rectifier that obtained the national patent.The air currents only rises without circulation compared to rotor.So it can save power and lessen wear and prolong service life.The classification accuracy is higher after twice separating.The mainshaft adopt stepless speed adjustment, it can get good effect easily.It makes the fineness adjustment easier, nimble and reliable.The separatorzone is redesigned Making full use of the main room for increasing the feed gas ratio,increasing the separating efficiency.The wearing parts such as the scattering plate,cyclone,snail angle,guide blades and rotor use the wear-resistant material.The new manganese plate will extend the service life.The bottom bearing applies both labyrinth seal and frame seal, which have good performance of sealing.Adopting mechanical damping principle,hence it solves the vibration problem of classifier.Piping adopts the pairs of interlocking air valve control,so it reduced the air leakage rate and the dust  Main Technical Data

Type

Product FinenessR0.08(%)

Blastvolume(m3/h)

Speed(rpm)

Power(kw)

Maximum Throughput(t/h)

Capacity(t/h)

TS-1

2~5

16000

250~500

15

50

10~18

TS-2

2~5

22000

220~450

18.5

90

15~28

TS-3

2~5

30000

180~400

22

120

20~40

TS-4

2~5

45000

160~340

37

150

30~50

TS-5

2~5

60000

130~300

55

210

40~70

TS-6

2~5

75000

130~260

75

260

50~85

TS-7

2~5

95000

120~240

90

330

75~110

TS-8

2~5

120000

110~200

110

450

110~150

TS-9

2~5

150000

110~180

132

550

130~170

High Efficiency T-Sepax Separator

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.