BW-based chain plate feeder (referred to as plate feeding machine) is a bulk material handling equipment to intermittent feeding into a continuous feed. The introduction of foreign advanced technology in the development of BW plate to feed the new machine, with traction, leakage less material, smooth operation long life with the advantages of easy maintenance.Features:1, This machine uses two-point support (mixed feeding increased intermediate supports), directly over one end of the crusher, the process layout is simple, 2, saving civil engineering costs.3, the tail unit to the special design, suitable for damp areas, accumulation of wet material will not stick the end of the chain skips teeth caused by the phenomenon, affecting production.4 sleepers tail shock-absorbing, shock-absorbing middle dragged a certain number of special roller bearings, to improve the impact of bulk materials and groove boards on both sides of roller bar with the force, improve operating component life.5, in particular, to enhance treatment of the head casing around under the hood can not be separated, and therefore without prejudice to the lifting broken rotor body.6, the traction chain and carry chains separate, dynamic load is small, increased life expectancy.7, the head unit 13 to 15 tooth sprocket, the number of teeth separate parity drive, life expectancy doubled.8, the head unit cut into three teeth sprocket, chain plate does not require demolition, to replace the gear, easy to maintain.9, the width of the machine parameters of reference F. L. SMIDTH (Denmark) and AUMUND (Germany) standard design

ISO Certificated Apron feeder