Ads by Google
1.Vacuum suction 2.Makes material completely mixed 3.Control cabinet 4.Used for middle-scale produce 5.corrosion resistant
This unit consists of vacuum emulsifying pot, heating and temperature control system, mixing system, vacuum
system, electrical/hydraulic lifting system, operation control cabinet and piping system .
Parameters of Emulsifying Pot
Capacity | Design Volume:200L maximum working volume:160L minimum working volume:60L | |
Pot | Structure | Materials of Inner Layer: SUS304 thickness:4mm |
Materials of Middle Layer: SUS304 thickness:4mm | ||
Materials of Outer Layer:SUS304 thickness:3mm | ||
Configuration | On the bottom , it has a discharging valve for materiels out, electrical heating system and temperature sensor (measuring range 0~199°C) | |
On the top, it has a liquid (solid particles) materiels feeding inlet, compressed air inlet, one observation hole with light, vacuum port, pressure gauge (-1~0.5 bar), man-hole | ||
Stirring type | Dispersion | Installation position: under the cover of pot. Materials:SUS316L |
Power:4kw; speed: 2800r/min | ||
Finally particles sizes:200nm~2um | ||
Frame Stirring and Central Shaft Stirring | Materials:SUS316L,Materials of scraper blade:PTFE | |
Power:2.2kw; Speed: 0~86r/min(can be adjustable by frequency converter). Frame stirring and central shaft stirring use the same motor | ||
Remarks:1, to start the stirrer, the cover can not be raised 2, when lifting the cover on, stirrer can not operate 3, when the cover rose on the top, you can jog stirring (for easy cleaning) | ||
vacuum system | Water cycle type vacuum pump,Power:2.2kw | |
hydraulic lifting system (for cover) | hydraulic lifting. Power:0.5kw | |
Heating type | electric heating. Power: 8kw | |
Discharging method | Dumping up cylinder or discharging valve on the bottom of the pot | |
Pressure | Limiting vacuum: -0.090MPa Working pressure in the interlayer and pot:0.2MPa | |
Operation control cabinet | Push-button switch, homogenizing time meter, temperature instrumentation( emulsifying pot, water pot and oil pot), variable-frequence governor, emergency stopping button. | |
Total weight | ||
Outside sizes | 1450×600×2650mm | |
Parameters of Solveny Pot
Name | Solveny Pot | |
Capacity | Design volume:120L Working volume:95L | |
Stirring type | Central Shaft Stirring | |
Power:0.55kw | ||
Speed:1400r/min | ||
Opening type of cover | Movable cover (semi-opentype) | |
Temperature display | digital time display | |
Discharging method | Discharging valve on the bottom of the pot | |
Heating type | electric heating. Power: 8kw | |
Pressure | Working pressure in the interlayer:0.2MPa | |
Structure | Materials of Inner Layer:SUS304 thickness:4mm | |
Materials of Middle Layer: SUS304 thickness:4mm | ||
Materials of Outer Layer:SUS304 thickness:3mm | ||
Control system | Controlling on the operation control cabinet with the emulsifying pot | |
Operating platform | On the same platform, the discharge valve is about 0.5m from the ground.
| |
Parameters of Solid Container
Name | Solid Container |
Capacity | Design volume:100L Container volume:80L |
vacuum emulsifying and heating machine for cosmetic process