Specification of wall charger :
Input Voltage | 100~240V |
Output Voltage | 3~36V |
Output Current | 0.5A~2A |
Frequency | 50/60hz |
Power | 15W max |
Size | 75X30X45mm |
OEM & ODM accepted! |
Package information:
inner package: white box Outer package: carton
size: 41*36.2*48.8CM 200pcs/carton
Gross Weight : 20KG/carton
Suggested application: wall charger, charger for digital camera, charger for video gameplayer or small power electrical equipment power supply,ect.
Detailed pictures of wall charger :
Quality Control:
6 full inspection:
Plug-in board full inspection : to make sure no components in wrong place, no reverse components, no components left, etcSemi-finished products full inspection: to make sure no cold solder ,lack of components, no tin dross, no short-circuit, no open circuit, no bad led indicator ,no high voltage, no low voltage, no output, etc Assembly full inspection: to make sure every unit with power ,without low voltage, without bad led indicator, low ripple, good appearance, with right cables, etcFull inspection after burn-in: to make sure every unit with high temperature resistance, with power ,no bomb unit, no high voltage, no low voltage, no bad led indicator, etc Finished products full inspection: to make sure every unit with power, no high voltage, no low voltage, no bad led indicator, low ripple, with right cables , no bad ultrasonic bonding, etcVisual full inspection: to make sure no scratched case, no cracked wires ,no missing screw, no label misaligned, et
3 sampling inspection:
IQC (incoming quality control): According to AQL-MIL-STD-105E level II standard, to make sure raw materials up to international standard
IPQC (input process quality control): Tooling/fixture change or change over will do initial confirm,Position inspection will do per 2 hours. To make sure the whole production process under control, avoiding mistake in bulk.
OQC (outgoing quality control): According to AQL-MIL-STD-105E level II standard. To guarantee every unit in good quality before arrive at our customers.
100% full load burn-in test for 1 hour, doing shock test per 10 minutes for 20 second. To make sure no bomb unit, every unit work at normal temperature, etc
2 pin plug 5v 2a micro usb wall charger for ipad