ETICS >shunan.therm bctn,Shunan board base coat mortar
Shunan SA802 Cement-based render for thermal insulation panels
Cement based fiber reinforced rendering mortar. Good flexible, waterproof, water preservation and bonding properties. Shock resistance and anti-ageing, no poison and no smell
The function of this product is to protect the polystyrene board and fix the mesh. The finishing coat can be paint,render,plaster etc.
PRODUCT INFORMATION
PRODUCT PACKAGING
Weight: 25kg
Color: grey
Consumption: 4.5~6kg/m2
Shelf life and storage: 6 months after manufacturing date in dry ventilated place
Normative reference: JG149-2003
Field of application:
Applied as substrate render on XPS, EPS mineral wool thermal insulation panels at all buildings.The function of this product is to protect the polystyrene board and fix the mesh. The finishing coat can be paint,render,plaster etc
Application substrates :
• On interior and exterior walls;- XPS (extruded polystyrene),- EPS (expanded polystyrene),- Mineral wool, Please consult us for all other application substrates.
Remarks:
1) Only mix with water, no other addition
2) The temperature of air and coat mortar must be from 5°C~35°C
3) The coat mortar must be used up in 3h
4) Avoid sunshine, high temperature and freezing
5) Avoid strong wind during application
6) Avoid rain during application
Consumption
4.5~6kg/m2
Mix ratio with water:
25kg / 5.5liter
Product specificationApplication properties:
• Pot life : 1 hours• Application thickness : 4 mm• Coat thickness : Max. 2 mm• Time between the coats : 3-4 hoursTools
electric-mixer,trowel,bucket
Substrate requirement
1) polystyrene board must be clean (no dust or dirt)
2)polystyrene board must be fixed stably (Wait min 24h before applying shunan.therm epsad
3)The surface of the whole EPS/XEPS wall must be level Preparation
1)Polystyrene board must be fixed stably
2)Polish the polystyrene board to make sure the whole polystyrene wall is flat
application enviroment
Temperature:5°C~35°CAvoid raining, high temperature and frostAvoid direct sunlight and class 5 windSafetyMay cause serious damage to eyesMay be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skinKeep out of the reach of childrenAvoid breathing the dustIn case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctorWear suitable protective clothing,gloves and eye/face protectionSA802 is a part of External Thermal insulation System of Thin Plastering based on EPS/XPS insulation board
SHUNAN XPS SYSTEM BUILD-UP
1. Substrate(e.g., concrete)
2. Interface Treating Agent and Adhesive
3. Insulation Foam
4. Base Coat(SA802)
5. Fiber glass mesh
6. Base Coat(SA802)
7.Flexible external wall putty layer
8. Finishing Coat
Application of Shunan XPS system makes it possible to:
obtain the required thermal insulation properties of external walls, extend the lifetime of external walls by protecting them from direct impact of atmospheric conditions,create a long-lasting thermal insulation, resistant to mechanical damage, moisture and biological factors (decay), use a single type of thermal insulation material on entire facades (XPS panels can also be used below the ground level) or, if necessary, combine different thermal insulation materials on one facade – the system is compatible with Shunan external thermal insulation system using expanded polystyrene (EPS) panels (in accordance with JG149-2003)mortar board