Self-levelling Material is self smoothing, free flowing.As underlayment for PU, leveling material for PVC,wearing overlayment.. Product DescriptionPolar Bear cementitious self-levelling materials consist of a blend of selected cements, superplasticizer, and aggregates modified with polymers and flow agents. It is used in conjunction with Polar Bear Primer. Polar Bear cementitious self-levelling materials are supplied as pre-blended powder which requires only the addition of water on site to produce a self smoothing, free flowing material. These materials are designed for installation by a continuous mixer pump, but can also be applied by hand. Functionally they are divided into two categories: underlayments (CSA-II and CSA-III) and overlayment (CSA-I)....Technical SpecificationTable 1 Specification of Polar Bear Self-levelling Materials

			CSA-I*	CSA-II	CSA-III
Setting Time		I.S., min	60~90	60~90	60~90
		F.S., min	90~120	90~120	90~120
Compressive Strength (MPa),≥		1d	13	10	8
		7d	20	20	15
		28d	35	30	20
Drying Shrinkage,%			<0.05	<0.05	<0.05
Bonding Strength(MPa),>			1.0	1.0	1.0
Flow	Initial		130~150 mm
	After 20min		130~150 mm
Working Life			≥20min
Application Temperature			5 ~40
Walk-on time			2 ~ 3 h	3 ~ 4 h
Time to overlaying			1~2d	1~3d	1~7d
W/P ratio			0.18	0.18	0.20

.

Advantage1. Fast application by pump, enables large areas of floor to be completed in a working day.2. Rapid hardening and curing allows speedy access for foot traffic and overlaying with carpet, vinyl etc.3. One pack product, applied by pump eliminates on-site batching and ensures consistency of mixed product.4.Dimensionally stable, can be installed in large areas.5. Excellent adhesion to prepared substrates.6.Environmental friendly. Uses1. As underlayment for epoxy, PU etc.2.As leveling material for PVC, tiles, carpets and wooden floor.3.As wearing overlayment.4.As decorative flooring materialApplication InstructionsPreparation1. The substrate should be clean, sound and free from loose material and contamination such as plaster, oil, paint and grease. The substrate should have a compressive strength of at least 20MPa and a surface tensile strength of at least 1MPa (pull-off strength).3.Oil and grease can be removed by chemical detergent followed by water cleaning.4.New concrete should be at least 14 days old.5. In case of porous substrate or hot weather, the substrate should be ponded with clean water for 1~3 hours before priming.PrimingThe object of priming is to seal the substrate to prevent air release from the subfloor rising and forming bubbles and pinholes on the surface. Extremely porous substrates may require two priming/sealing coats. Primer coats must be allowed to dry before applying the self-levelling material.Pumping or Mixing by hand2.In case of installation by hand, pour the mixing water into the clean mixing vessel. Add the whole bag of powder slowly to the water, mixing continuously with a heavy duty drill fitted with a suitable paddle. Mixing should continue for at least 3 - 5 minutes3. Whatever pumping or mixing by hand, make sure that a smooth creamy consistency is obtained.Pouring1. Make sure there is no ponding of primer before pouring the material.2.pump should be used for large area application.3.Pour the mixed material on to the dry primed surface, spread with trowel and allow to self-smooth. Roll surface with the purpose made spiked roller. Best results are achieved when the pouring and leveling is a continuous process.Cleaning1.The material should be removed from tools and equipment with clean water immediately after use. Hardened material can only be removed mechanically.CuringCuring is not essential normally. But in case of high environmental temperature, direct sunlight or windy weather plastic sheet should be used to cover the hardened surface for 2 days.Estimation

Package
Self-levelling material	25 kg/bag
Primer	50 kg/bucket
consumption
Self-levelling material	1.7~1.8 kg/m2 · mm
Primer	5 m2/L/2 coats

StoragePolar Bear self-levelling material should be stored on pallets in dry conditions. Under these conditions the product will have a shelf-life of 6 months.

Cementitious Self-Leveling Material Floor Mortar