Welcome to ECVERY
micro stepping motor drive
micro stepping motor drive
Supplier Info
[China Supplier]
Contact Person : Mr. Li Jing
Tel : 86-755-83681167-205
Fax : 86-755-83681143
Product Detail
1. CE Compliant 2. Factory Direct Prices 3. Voltage: DC24-80V 4. Current: 0.1~6A Stepper motor driver 5. Size:45*136*92(mm)



SEA2D68 is a microstep motor driver with the same angle and constant torque, driver voltage DC24-80V supplied by single power and current under 6A (6 or 8 wires), which is suitable for 2 phase hybrid stepper motors with diameter 57-86mm models.

Advantages and Selling Point

High Performance, Low Noise, Good StabilityFactory Direct PricesFine QualityDelivery On TimeGood Communication Sales TeamGood Service

Features and Specifications

Microstep 12/8 selectable .The max resolution up to 40000 stepsPulse Input Frequency up to 200KHzDrive Current from 0.1A~4.0AVoltage ranges: DC24-80V (the best input DC70V )Dimentions:45*136*92(mm) Weight:0.5kgError Protection: overheated, over-current,  low-voltageSpecial Control CircuitOptically Isolated Signal I/OBipolar constant current chopping mode


Engraving machine, Labeling machine, Spray painting machine, Embroidery machine, Medical equipment, Metallurgical furnace, Semiconductor equipment etc.

micro stepping motor drive

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.