Welcome to ECVERY
machines for road construction GR215
machines for road construction GR215
Supplier Info
[China Supplier]
Contact Person : Ms. zhao galia
Tel : 0086-10-59560491
Fax : 0086-10-59560447
Product Detail
machines for road construction china made 215HPb

machines for road construction

Motor Graders are mainly used in ground leveling ,canalling , slope scraping ,earthmoving ,scarification or snow removal work on road, airfield ,farmland ,and so on .They are necessary construction machines for national defense engineering ,mine construction, town and country roads building ,and farmland improvement..

 Performance and characteristic New appearance design. The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius,maneuvering and flexible. The electro-hydraulic controls the power shift gearbox,with 6ahead gears and 3 back gears. The international matching hydraulic parts are adopted,with reliable operation. The motions of the blade are fully hydraulically controlled. The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism. The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable,with convenient application,and the comfort of driving is improved . The cab is grand and nice,with wide eyeshot and good sealing . The front bulldozing plate, rear scarification device,front scarification harrow and automatic leveling device can be added.
Main Technical Specification
Basic specification
Engine model6CTAA8.3 6CTA8.3
Rated power/speed153kW/2200rpm  160kW/2200rpm
Operating weight(Standard)16500kg
Performance specification
Travelling speed ,forward5,8,11,19,23,38 km/h
Travelling speed ,reverse5,11,23 km/h
Tractive force(f=0.75)82KN
Max. gradeability20%
Tire inflation pressure260 kPa
Working hydraulic pressure16 Mpa
Transmission pressure1.3~1.8MPa
Operating specification
Max. steering angle of front wheels±50°
Max. lean angle of front wheels±17°
Max. oscillation angle of front axle±15°
Max. oscillation angle of balance box±15
Frame articulation angle±27°
Min. turning radius using articulation7.3m
Maximum lift above ground450mm
Maximum depth of cutting500mm
Maximum blade position angle90°
Blade cutting angle28°—70°
Circle reversing rotation360°
Moldboard width X height4270×610mm

machines for road construction GR215

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.