Welcome to ECVERY
XCMG Motor Grader GR230/Operating weight(Standard)16.5ton
XCMG Motor Grader GR230/Operating weight(Standard)16.5ton
Supplier Info
[China Supplier]
Contact Person : Ms. Yang Yan
Tel : 86- 451- 55568197
Fax :
Product Detail
Rated power/speed: 172kW/2200rpm  
GR230
Basic specification
Engine modelCUMMINS 6CTA8.3-C230
Rated power/speed172kW/2200rpm
Dimension(LxWxH)8970×2625×3470mm
Operating weight(Standard)16500kg
Performance specification
Travelling speed ,forward5,8,11,19,23,38 km/h
Travelling speed ,reverse5,11,23 km/h
Tractive force(f=0.8)90KN
Max. gradeability30%
Tire inflation pressure260 MPa
Working hydraulic pressure18 MPa
Transmission pressure1.3~1.8MPa
Operating specification
Max. steering angle of front wheelsLeft / Right 50°
Max. lean angle of front wheelsLeft / Right 17°
Max. oscillation angle of front axleUp / down 15°
Max. oscillation angle of balance boxBefore / after 15
Frame articulation angleLeft / Right 27°
Min. turning radius using articulation7.3m
Biade
Maximum lift above ground450mm
Maximum depth of cutting500mm
Maximum blade position angle90°
Blade cutting angle28°—70°
Circle reversing rotation360°
Moldboard width X height4270×610mm

Under our policy of continuous product development and improvement ,we reserve the right to change specifications and design without prior notice.

The XCMG GR Series Motor Graders are mainly used in ground leveling ,canalling , slope scraping ,earthmoving ,scarification or snow removal work on road, airfield ,farmland ,and so on .They are necessary construction machines for national defense engineering ,mine construction, town and country roads building ,and farmland improvement..

Performance and characteristic

New appearance design.

The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius,maneuvering and flexible.

The electro-hydraulic controls the power shift gearbox,with 6ahead gears and 3 back gears.

The international matching hydraulic parts are adopted,with reliable operation.

The motions of the blade are fully hydraulically controlled.

The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.

The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable,with convenient application,and the comfort of driving is improved .

The cab is grand and nice,with wide eyeshot and good sealing .

The front bulldozing plate, rear scarification device,front scarification harrow and automatic leveling device can be added .

 
 

XCMG Motor Grader GR230/Operating weight(Standard)16.5ton

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.