1.JT2DT-1 Water Temperature Meter of motorcycle part 2.Working voltage:DC8-28V 3.High quality 4.Competitive price

Product name          JT2DT-1 Water Temperature Meter of motorcycle part

Technical Specifications   1.Working voltage:DC8—28V

2.Temperature measurement range  0--120degree celsius

3.Measurement error   ±1degree celsius

Installation and use of

1. fixed the measurement table to the prople position of instrument sets,

and than installment the water temperature sensor plugs which matching the measurement table to the engine cooling Cean waterways (or replace the original car temperature sensor plugs). Finally, measure the table received a key to positive power line to control the power supply line, then car metal body negative.

2.Product wiringdiagram

3.when open the power,the measurement table start working,When the alarm sound at the same time temperature display “UU” or “00”, it means the temperature sensor plug that have open or short circuit fault line

4. After supply voltage display, under normal circumstances, should show the temperature sensor

5. Alarm function

When the water temperature more than 95degree celsius less than 99degree celsius, the measured surface temperature digital display will alternately show the actual temperature and “≡≡”, accompanied by beeps

When the temperature rose to 100 degree celsius, the measurement of surface temperature display shows "00" and 30 accompanied by beeps

Notes:

1. Installation, meter connection as far as possible away from interference sources, such as speakers, power lines, so as not to affect the instrument to work

2. Mounting bracket with ordinary flashlight can stand (provided)

3. Connection with the corresponding color, position, when use 8mm sensing, the installation should not force too much, so as not to wring

4. Installation location must not be the sun and light, rain

JT2DT-1Water Temperature Meter of motorcycle part