how to use the PPR pipe wleder:

1.vertically cut the pipe with pipe cutter,the cut should be smooth, no burr or raw edge.

2.mark a line of required length on the end of ppr pipe wleder.

3.choose the heating part of hot-pipe wleder accroding to the diameter of the pipe and then power on and pre-heating.

4.the indication lamp of operating temperture is light, at the same time; inset the pipe and the fitting into the hot-melting machine to the marked part without turing.

5.after the fixed time of heating, put off the pipe and fitting and quickly insert the pipe into the fitting to the fixed length without turning

PPR pipe wleder