Welcome to ECVERY
PPR fitting mould (male thread elbow)
PPR fitting mould (male thread elbow)
Supplier Info
[China Supplier]
Contact Person : Ms. Lu Judy
Tel : 86-576-84025855
Fax : 86-576-84025857
Product Detail
We offer PPR molds from size 16mm to 160mm covers Coupler, Elbow, Tee, Valve and metal insert parts.  

General Design

1.1 The mold(s) should always have interlocks for both cavities and cores.

1.2 The mold(s) shall be generally provided with venting facilities. These venting facilities shall be provided at the end of the flow way and near to flow lines.

1.3 The mold(s) should be equipped with feed for its handing. When it is not possible to put feet, use a stand for supporting the mold and storage.

1.4 The eyebolt thread in the mold(s) should be made in such a manner that the suspension remains in balance (Equidistant from the center of mass)

1.5 In the base plates (Upper and Lower) there should be four holes with threads with the same dimensions as the eyebolt.

1.6 Make undercuts in the corners between the plates to make easy the disassembly of the mold, between all the plates (lift-off corners)

1.7 Incorporate lubricating sliding plates

Type of fittingMould for PPR pipe fitting
Description of goods (mold name)Coupler, Elbow, Tee, Reducer....
No.of cavitiesMulti- cavities
Steel for Mold baseStandardization DIN 1.1730
Steel for Core,cavityWerkstoff - DIN1.2738 with Nitraded treatment
Mold componentsHASCO/DME Standard spare parts
Core pulling systemHydraulic cylinder
Mould life1,000,000 shots
Runner typeCold runner, tunnel gate or hot runner
Fitting standardISO EN 15874
Working mode Automatic mode, sprue separated from product during ejection

PPR fitting mould (male thread elbow)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.