Ads by Google
Cavity No | 16 | 24 | 32 | 48 |
Dimension of 17g preform mould | 800×380×430 | 870×460×460 | 870×700×520 | 1040×680×535 |
Weight | 980kg | 1300kg | 2200kg | 2900kg |
Dimension of 30g preform mould | 800×380×460 | 870×460×480 | 870×700×530 | 1040×680×560 |
Weight | 1060kg | 1400kg | 2400kg | 3100kg |
Dimension of 45g preform mould | 800×380×490 | 870×460×490 | 870×700×560 | 1040×680×590 |
Weight | 1100kg | 1500kg | 2600kg | 3200kg |
Note: The thickness and weight of moulds are in accordance with the tubes, these measurements will change in case the products are improved
PET Mould Design
We use UG to design the mould .Qianjia Machinery designs not only preform with standard neck size for water preform, carbonated drink preform and oil preform ,also design preform of special shape responding to customer’s request. We adopts a wide range of computer-aided engineering service from design conception to the finished products to make customer satisfied
Material of PET Mould
Core ,Cavity ,Screw: 2316 Germany
Preform injection mould from one cavity for wide mouth jar and gallon bottle preform up to 72 cavities narrow neck
Mould with imported steel with fine polishing,high hardness and anti-corrosion to ensure our molds’ high precession and good quality
Developing the PET MouldProfessional PET Preform Mould design to make imagination into realityAdvanced Hot runner design and even heating temperature make sure the high quality of plastic productsLong Service Life: Over 3 million shotsLow Preform Eccentricity
Valve—gate System
Pin-valve gate,pneumatic drive the nozzle pin simultaneous high speed open and close action,which can effectively control the injection hole open and close actions on each cavity ,reliable seal function ,smooth moving ,low thermal expansion rate ,long using life and also saves electric energy
Heating System
Our PET Preform mould with double heating system.It has separate temperature control mode: the heater bars are used to heat the molds’ mainfold plate; the samll heaters supply continuous temperature for cavity nozzle
Heating circle: Hotset /Rotfil Adopt Germany standard PID Temperature Controller)
Heat treatment
Mechanical treatment cavity and core to prolong service life, nitrogen treatment with neck screw with fitly operation, ensure long using life over 2.5 millions shot of injection cycle
Cooling System
A specially designed cooling system with perfect cooling effect for each inner parts including core, cavity and valve gate system of Qianjia PET Preform Mould
After-sale service
Together with the PET Preform Mould,full set of spare parts will be supplied for free to keep mold normal working. At the same time,we will provide you technical support for any request in any time
For more information,please feel free to contact with us, and Sincerely welcome you to visit our company to learn more of us
Hope to cooperate with you
PET Mould